Epoxy Countertops…Faux Soapstone

Mimzy lombardo
by Mimzy lombardo
4 Materials
$200
8 Hours
Medium

This post might contain affiliate links…see my disclosure here. Epoxy Resin countertops are gaining in popularity. I’ve lived with my perimeter epoxy counters and backsplash for well over a year now and I still adore them!

I finally got around to doing my island countertop. I love my dark island top to match the paint on my cabinetry, not an exact color match, just dark.

The previous finish on my island countertop was also dark, it was made of plywood and concrete feather finish, and sealed with oil based polyurethane. It held up really well in my very active kitchen. However, it was starting to look warn out and I was planning to change it to an epoxy finish ever since I did the perimeter counters. So when @Total Boat reached out to me and gifted me a counter top epoxy kit , the island countertop skipped right to the top of my to-do list. 

Since I needed to give my countertop a thorough sanding, I removed it completely and took it outside. I would’ve left it in place if it only needed a light sanding. 

My intention was to completely sand through the polyurethane, but after a good bit of sanding I realized that was a little ambitious. So I just gave it good once over, and brought back into my kitchen for primer.

I painted one coat of BIN shellac based high bonding primer. The shellac primer is THE BEST high bonding primer and the only primer that will stick to laminate and Ikea furniture. Then I painted over the primer with one coat of regular latex house paint in a shade of black called Graphic charcoal by Behr. 

The next step is where I differ from most epoxy tutorials. I used regular latex/acrylic artist paint to give the whole countertop a soapstone look. I mixed black and white paint on my brush and stippled the countertop with a dry brush to make it look mottled, like soapstone.  I did this because I’m an experienced painter and I know how to work with paint to get the exact effect I want. Epoxy is a different story …it kinda does what it wants. And since I’m fairly new to epoxy I don’t know all the tricks of the trade. I love most of the epoxy results, but some look like a bowling ball and I didn’t want the bowling ball look. I like my counters to look as authentic as possible. And subtle…not too much movement. 

Mixing the epoxy is the first and probably the most important step. The countertop kit is a 1:1 ratio. It must be exactly 1:1. Don’t skimp on buckets for mixing. Buy a bucket for each part, the resin and the cure. And make sure the bucket your pouring into is big enough and has flat sides so you can scrape the sides while mixing.  It’s also very important that your resin and cure is at the proper temperature…check the label. 

Once the two parts are mixed thoroughly, dump it all out onto your countertop scraping the sides of your bucket. Then using your spatula, mix the epoxy a little more on the countertop particularly the last bit out of the bucket, in case it didn’t completely mix in the bucket. Spread the epoxy over the entire countertop to within 2″ or so from the edge. Once the epoxy is covering the whole surface, then begin to spread the epoxy to the edge, letting it flow over the edge of the countertop. The edges are last because the epoxy will have time to set up a bit and not flow so freely. If you let the epoxy flow over the edges right away you’ll lose a lot of epoxy to the floor and the epoxy on the edges of your countertop will be very thin.

Time to apply the design. Since I used paint to give my countertop texture before pouring the epoxy, I only needed to add veins. For the veins you must use spray paint. NOT latex paint. The brand of spray paint doesn’t matter. You spray a pool of paint into a bucket, bowl, box, or whatever you have on hand, pick up a little epoxy with a paint stick, add some spray paint to the epoxy on the paint stick and drizzle it across the counter in a vein like pattern.

This part is completely subjective, but I would suggest looking at a lot of pictures of real stone to get an idea of what you want. I would maybe even print out pictures if you’re new to the process. Sidenote: There’s a lot of ways to apply the color and design to epoxy to get so many various looks. Definitely check out videos on the subject. My perimeter counters and backsplash I used a little different technique. I chopped in the spray paint with a paint brush to make the color and pattern. Check out that video [/url]

Take care to allow the color from the veins to drip over the edges at the start and finish of the veins to look more authentic.

Make sure the edges are smooth by brushing them with a brush, roller, or even your gloved finger. Then for about an hour after the epoxy is poured I used a paint stick to scrape the bottom of the counters to remove and epoxy drips.

The last step is to go over the entire surface with a heat gun to pop the air bubbles and manipulate the vein lines if desired.

My island is just about finished, my plan is to sand this epoxy with 400 grit sandpaper to make it matte like REAL soapstone, or possibly buy the matte finish sealer sold by StoneCoat counters. Not sure yet, and for now I’m living with the super high gloss finish until I gather the courage to sand. If you’re thinking of tackling an epoxy countertop take a look at the video…There’s a ton of useful tips and tricks to get the job done right. And by no means is this blog post an exhaustive tutorial on how to pour epoxy counters. By all means check out many sources for tips and tricks. 

I can honestly say that I love my epoxy counters. They’re durable, easy to clean, look great, and make me happy. They’re not REAL stone, but for the price of a night out, they 100% are worth the time and effort.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Mimzy lombardo
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 5 questions
  • Judy Judy on Mar 25, 2021

    Would this work over formica?

  • Susan Susan on Mar 10, 2023

    Your materials list indicates you used Stonecoat's craft resin instead of the original formula. What is the difference?


    P.S. I love Stonecoat's YouTube videos. The host is an entertaining goofball and his tutorials are great!

  • Judy Judy on Mar 06, 2024

    Is this safe for food?

Comments
Join the conversation
3 of 15 comments
  • Sandy Sandy on Mar 11, 2023

    Omg that is GORGEOUS! May I ask can you do epoxy over granite?

  • Krafty Kathy Krafty Kathy on Mar 31, 2023

    I love that you layered epoxy over latex then added veining to the clear epoxy. I had wondered if i could do that on some other projects. I bet the camera can't capture the depth that adds. I would love to see how the the matte sanding turns out for a honed stone look.

    I wish I had known the heat gun trick before doing my tub and sinks.

    • Mimzy lombardo Mimzy lombardo on Mar 31, 2023

      Thanks Kathy. I find this method allows you to have a lot more control over your vein design.

Next