How hard is it to make an epoxy table top? Making my own end tables.
Related Discussions
Can I ask Home Depot to cut my wood?
I'm seriously considering making this twisty side table that I fell in love with here on Hometalk (By Chasing A Dream), but cutting the wood is a bit too ambitious fo... See more
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
What type of hinges are used on the top of this folding table?
Does anyone know what type of hinges are attached to the top of this folding table? The legs fold in toward the back then the top folds down flat against the legs.
How would I be put on these wheels ?
I am planning on doing a mobile wood bench using 2x4. I have these wheels but have no clue to put them on
Sealing/smoothing crate wood
I am turning the sides of an old wooden crate into a coffee table top. The wood is similar to pallet wood: unfinished and prone to giving splinters. How might I go ab... See more
How do I make DIY furniture sliders to move heavy furniture?
HOW DO I MAKE FURNITURE SLIDERS TO MOVE HEAVY FURNITURE.Best furniture sliders!Move furniture easily with Round furniture moving kit that Amazon reviewers swear by!
Not hard, just make sure you've got a torch to pop the bubbles!
Also recertain to measure accurately part A and part B if you are not using the entire bottles. Mix according to directions. If it says 5 minutes, it actually means 5 minutes. I would pour several thinner layers instead of a thicker one. Let each layer dry (cure) for the recommend time. I would do this outdoors as I find the scent a bit overwhelming indoors. If it is humid outside it will take longer to cure. Also if it is colder outside where you are wait until the temperature are 65+. At least this has worked for me.