Meet Conni! Our Favorite Corner Shelf - Free Plan

Mr ATC
by Mr ATC
2 Materials
$20
2 Hours
Easy
For this project, I am making a new desk for my son and I have decided to use the corners by adding a simple DIY shelf design which will help me to save some space and at the same time give my son a space to put some books, electronics.

Check out the video for more information.

Add Me Here
here is the video for you
My boy love it so this is adding a nice smile on my face
here is the reclaimed wood still from the trash container ...
so nice to have a construction site not far from home... icon
For this creation, I will be using what I have from the trash container…
Meaning plywood from 1.8 cm thick and note that you can here make the cuts using any kind of saw you have… (a jig saw, a table saw or even a circular saw).
 Each pieces here are very easy to make since they rectangles of same dimension, the only extra step here is the curve I am making on half of them to change the design a little bit.
To make the curve, I am marking here the center of each rectangles, then using my beam compass to trace the curve in those corners.
For the cut here I decided to use my jig saw but note that you could also use your band-saw if you want some precise cuts
curved with my jig saw...
Then some sanding to smooth down the edges


I’ve decided to add some glue and use some corner clamps (those clamps are very inexpensive and very handy for clamping things at 90 degree angles)
If you want to get one of those I am adding here a link where to get them…
It can be very handy to have your free plan available here so you can visualize how to fit them together.


Then I have decided to do here again my fancy painting in blue using tapes, so it match with the rest of the room.
Here a picture without the shelves
and the final with it!!



I hope that you like it and if you would like to support me in making more videos and providing you with free plans, please share this article around you...


As usual Mr ATC for another idea of housing....
Suggested materials:
  • Nail gun   (home store)
  • Jigsaw   (home store)
Mr ATC
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  1 question
  • Miss Daisy Miss Daisy on Aug 04, 2017

    So far I love everything you have done , very precise and professional looking . Did you paint your son's designer wall and what shade of blue is that ? I live in an apartment so you can't do much , but I'm re doing what I can and in blue . I've been buying little accent pieces , fabric , in that shade of blue . Thanks for sharing and have a great day .🤗

Comments
Join the conversation
3 of 63 comments
Next