How can i make these wine racks more secure or so they dont slip??

q how can i make these wine racks more secure or so they dont slip
q how can i make these wine racks more secure or so they dont slip
  12 answers
  • Cheryl A Cheryl A on Sep 17, 2021

    I would go back to the post where you found this project and ask there since we don't have the project posts -

    you could use a large holder for the bottles but they look pretty secure from the photo above

    here is another idea for the rack

  • GrandmasHouseDIY GrandmasHouseDIY on Sep 17, 2021

    I'm curious as to what exactly is slipping? Could you add little rubber strips to the rack itself so it hold the wine bottles better? Maybe you could wrap them in tape?

  • William William on Sep 17, 2021

    If you mean prevent the bottles from slipping. A bead of clear silicone caulk on the wires. A bead of hot glue may work.

  • If the bottles are slipping, you may need different metal holders. In the meantime, try wrapping them with rubber bands.

  • Michelle Leslie Michelle Leslie on Sep 17, 2021

    Hi Anita, you can tie a rubber band around the wires. That should help.

    • Alice Alice on Sep 26, 2021

      Get a wide ribbon and pull it from top to bottom through the loops that are holding the bottle. Make a bow at the top and bottom, change with seasons. You should be able to get the bottles out by pulling from the edge

  • Mogie Mogie on Sep 17, 2021

    What is slipping the rack or the bottles? More info please. Thanks!

  • Annie Annie on Sep 17, 2021

    I'm wondering what is slipping as well. Is it the actual bottles, because maybe they could be cushioned somehow? Or is it the actual rack that is slipping?

  • Redcatcec Redcatcec on Sep 17, 2021

    You could glue rubber bands on the brackets or a thin strip of rubber shelf liner (dollar store).

  • Betsy Betsy on Sep 17, 2021

    Hi Anita: The neck of the bottle should be lower than the bottom so as to keep the cork wet, and perhaps you could put the holder on the wall at an angle so that they are lower. Then, perhaps a line of hot glue on each holder to give them a more slip proof surface.

    Good luck

  • Anita Anita on Sep 18, 2021

    Thank you everyone great ideas!

  • Kmdreamer Kmdreamer on Sep 19, 2021

    Hot glue the inside of each bracket were the bottle touches the glass

  • Lindsay Aratari Lindsay Aratari on Sep 20, 2021

    Can you add an extra nail or screw to the wall to secure it more