You'll need a sheet of 600 grit sand paper and a can of Rustoleum Appliance Paint. Lightly sand the rusty spots then wipe clean of all dust. Let dry. Tape off areas you do not want painted. Shake can thoroughly then spray paint the top with left to right movements providing an even coat of coverage. A light coat is best, let dry, sand if necessary, then apply a second coat. You can do this and you'll be happy with your project. (I did a refrigerator and was happy the outcome.) Best of luck.
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks...
See more
You'll need a sheet of 600 grit sand paper and a can of Rustoleum Appliance Paint. Lightly sand the rusty spots then wipe clean of all dust. Let dry. Tape off areas you do not want painted. Shake can thoroughly then spray paint the top with left to right movements providing an even coat of coverage. A light coat is best, let dry, sand if necessary, then apply a second coat. You can do this and you'll be happy with your project. (I did a refrigerator and was happy the outcome.) Best of luck.
Thank you so much for your explicit directions. I will follow your advice. Anita
If only a litle, you could try WD-40.