How do I buff plastic bath showers and tubs?

+3
Answered
  4 answers
  • Peggy L Burnette Peggy L Burnette on Jan 11, 2019

    Hi Deb, this is Peggy. Here are some instructions on making your shower and tub shine. Hope this is what you needed, if not let us know and we will dig a little deeper for you. How to Restore Shine to Plastic Bathtubs & ShowerEnclosures

    1. Wipe all surfaces of the bathtub and walls with a cloth soaked in white distilled vinegar.
    2. Scrub the walls and the tub with a non-abrasive pad and mild detergent. ...
    3. Apply vinegar to stubborn soap scum or rings directly. ...
    4. Mix 1 cup water and 1 cup chlorine bleach to kill mold. ...
    5. Rinse the bathtub thoroughly.

    How to Restore Shine to Plastic Bathtubs & Shower Enclosures | Hunker

    https://www.hunker.com/.../how-to-restore-shine-to-plastic-bathtubs-shower-enclosures

  • V Smith V Smith on Jan 11, 2019

    Back in the 80's there was a specialty product that was like automotive wax in that you apply it, let it haze over, then buff it off with a soft cloth. We are in our second house with acrylic tubs and enclosures and I just use automotive paste wax BUT don't wax the floor of the tub or shower. One change we did make years ago was to stop using bar soap because I feel it hardens on tbe walls when it dries. We also squeegy the walls after each shower.

  • Lee Lee on Jan 12, 2019

    If the tub has a lot of soap scum build up spray it with easy off oven cleaner. Use the original works better. Let it sit overnight then wipe it off with a damp cloth the next day. Then use car wax to shine it up

  • Alex Alex on Jan 12, 2019

    1/2 blue Dawn dishwashing liquid, 1/2 white vinegar( warmed), spray it on. After 10/15 minutes, spray again, then rinse off with a wet sponge/shower.

    RUN THE BATH FAN. Magic!