Fill a spray bottle with a 50/50 solution of Dawn dish soap and vinegar. Spray it on the tub and tile and let it work. If they are tough stains, you may have to scrub with a plastic scrubbie and repeat.
What kind of tub is it? Cast iron, steel or fiberglass? The type of tub would dictate the recommended cleanser. Because fiberglass can be easily scratched, baking soda seems to be the less offensive of all the mild detergents listed in the resource below.
“For stubborn areas, such as bathtub rings, you can make a paste out of baking soda and a little water. Wet down the tub’s surface and gently rub the paste onto it with a sponge, soft nylon brush, or cloth.”
50/50 white cleaning vinegar and blue Dawn. Put in a spray bottle and saturate the area. Make sure it is ventilated. Use a power scrubber (I have the hurricane spin scrubber) to help with the scrubbing.
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks...
See more
Fill a spray bottle with a 50/50 solution of Dawn dish soap and vinegar. Spray it on the tub and tile and let it work. If they are tough stains, you may have to scrub with a plastic scrubbie and repeat.
Here's a post on how I clean my bathroom tub - https://chascrazycreations.com/clean-bathroom-natural-products/
If it's super dirty and the above doesn't help - you can use toilet bowl cleaner to clean it too.
1. Surface clean with plastic scraper (NOT metal) or old plastic credit card to remove hard gunk. RINSE.
2. Wipe down with Heavy Duty Mr. Clean Magic Eraser. RINSE.
3. Wipe down again with Windex. RINSE.
Here are some tips for cleaning grout: https://www.craftylittlegnome.com/the-best-homemade-grout-cleaner/
What kind of tub is it? Cast iron, steel or fiberglass? The type of tub would dictate the recommended cleanser. Because fiberglass can be easily scratched, baking soda seems to be the less offensive of all the mild detergents listed in the resource below.
“For stubborn areas, such as bathtub rings, you can make a paste out of baking soda and a little water. Wet down the tub’s surface and gently rub the paste onto it with a sponge, soft nylon brush, or cloth.”
https://www.hometips.com/repair-fix/bathtub-fiberglass-cleaning.html
https://www.hometalk.com/diy/clean/bathroom/5-ways-to-clean-your-tub-tile-29325620
5 Ways to Clean Your Tub & Tile
If it’s plastic or fiberglass, The Works from Dollar Tree works very well- but the fumes are very bad.
Wear long gloves, a P100 mask and run more than one fan.
Hello Shenelle,
Try Shadazzel or Bar keepers Friend or Gumption..............Good luck!
50/50 white cleaning vinegar and blue Dawn. Put in a spray bottle and saturate the area. Make sure it is ventilated. Use a power scrubber (I have the hurricane spin scrubber) to help with the scrubbing.
I use dawn and a magic eraser. If that doesn't work then I use a cleaner for soap scum.
chlorax