I made a solution of bleach and water and wiped the paneling down with it. You'll have to play with how much bleach to get the right amount. I did it behind the bar, in my family room. Let it dry out, for a couple days. Then, apply a hefty coat or 2 of wood wax.
Nothing much you can do to lighten it. The finish is put on at the factory. Most paneling is not real wood grain. The substrate can be wood, MDF, hardboard, and even particle board. The actual surface you see can be a photo of wood, wood grain paper, or vinyl. Most people just paint it.
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks...
See more
Do you want to paint it?
http://homeguides.sfgate.com/make-old-paneling-look-good-91665.html
Try Murphys Oil Soap, dry completely, and then buff with a clean rag. This can be purchased at the supermarket.
I made a solution of bleach and water and wiped the paneling down with it. You'll have to play with how much bleach to get the right amount. I did it behind the bar, in my family room. Let it dry out, for a couple days. Then, apply a hefty coat or 2 of wood wax.
I have painted all my outdated paneling that is in my basement and love it. So bright and clean now!
Nothing much you can do to lighten it. The finish is put on at the factory. Most paneling is not real wood grain. The substrate can be wood, MDF, hardboard, and even particle board. The actual surface you see can be a photo of wood, wood grain paper, or vinyl. Most people just paint it.
You can paint it, but prime it first to prevent dark from bleeding through.