by Keith Reed
I have an acrylic walk in shower. Any one know of any good cleaners ?
+4
Cannot use scrubbing bubbles or any of the conventional cleaners, because the installer said they will all damage the surface. They said dawn dish soap and water, but that just doesn’t get it done.
7 answers
-
![Cindy Hagemann]()
Cindy Hagemann
on Dec 06, 2017
This is what my housekeeper uses on ours, Ecosense Tub & Tile Cleaner. Buy it on Amazon.![]()
-
![Candy Walsh]()
Candy Walsh
on Dec 06, 2017
Rustoleum KRUD KUTTER is a great cleaner. -
![Sharon Smith]()
Sharon Smith
on Dec 06, 2017
I was advised to use hot water, white vinegar and a drop of blue dawn on my NEW shower installed. Was also told that SCRUB FREE from Walmart would be ok but anything else could damage it and void the shower. I use plain vinegar between times and does great job. -
![Dl.5660408]()
Dl.5660408
on Dec 06, 2017
Bar Keepers Friend is what I use -
![Cheryl A]()
Cheryl A
on Dec 06, 2017
Mr Clean magic erasers -
![Vimarhonor]()
Vimarhonor
on Dec 06, 2017
Because fiberglass can be easily scratched, baking soda seems to be the less offensive of all the mild detergents listed in the resource below.“For stubborn areas, such as bathtub rings, you can make a paste out of baking soda and a little water. Wet down the tub’s surface and gently rub the paste onto it with a sponge, soft nylon brush, or cloth.”https://www.hometips.com/repair-fix/bathtub-fiberglass-cleaning.html -
![Peg]()
Peg
on Dec 06, 2017
An in home steam cleaner will work.
Cindy Hagemann
on Dec 06, 2017
Candy Walsh
on Dec 06, 2017
Sharon Smith
on Dec 06, 2017
Dl.5660408
on Dec 06, 2017
Sign Up to Answer
Suggested Project Book
