How to remove solid stain off deck spindles
I'm using Woodrich Stain Remover and it's working OK on the flat surfaces. It just drips down off the vertical surfaces. What is an EASY way to remove the stain off the spindles?
Related Discussions
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
How to clean smoke smell out of pillows?
How do I wash pillows to remove the smell of smoke?
How to clean paint brushes with paint thinner?
How to clean paint brushes with paint thinner?
How to clean a mirror with vinegar?
Vinegar seems to be the answer to everything. So how do I use it to clean my mirror?
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
How do I remove this stuck on grip tape off the decking off the boat?
This grip tape is toteally stuck. We've tried sanding it, scraping it and so on but it won't budge. What's the best way to take it off? It's stuck with a super strong... See more
You can try CitriStrip and cover it with plastic to see if that keeps it from dripping. It's a thicker product. Otherwise, sanding is up next.
It may be time to rent a pressure washer to get the stain removed from those spindles!
I would just start sanding. I don't think stripper usually gets down deep enough to get rid of stain. outdoor stain may be different but this is what I have found with stain. Just make sure you use a good shop vac and wear a mask.
I use krud kutter.
Maybe just replace the spindles. What is your time worth?
Seriously thinking about that and replacing them with lattice panels.
Use Citristrip like Robyn suggests. It's a paste form made for vertical surfaces so it won't drip. It also removes lays of paint or stain.
You'll have to sand the heck out of it and use a paint stripper probably.
Sand off or you could use a paint remover brush on then wash off get it in Home Depot less mess with lightly sanding
Hello. That looks like a lot of work, if sanding is the last alternative. I would consider to save up and get vinyl rails.
I would get an automobile cleaner degreaser and apply that to the wood. It should remove the stain.
Or you can get some vinyl siding an apply it over the wood.
Paint stripper for sure.