Sparkling Napkin Rings
6 Materials
Easy
Make your napkin rings sparkle in the table this year by using some rhinestone mesh. Change the decorations used to have these rings all year around.
All materials with links can be found in the blog
Cut 4 x 16cm (1 1/2in x 6 1/3in) long pieces from the acetates.
Cut 4 x 15cm (1 1/2in x 6in) long pieces of the rhinestone mesh. (The short side is 8 rhinestones exactly)
Place glue around the acetate cuttings leaving, 1cm from one of the long sides. Place spots of glue in the center to secure well the mesh. Set now the mesh and let it dry well.
With the help of paper clips, roll the acetate, place glue on the 1cm left earlier and glue under the opposite side forming the napking rings. Let it dry well.
Cut about 20cm long ribbon, set a jump ring and pass a star paper clip.
Secure the ribbon with some glue on the top side of the ring, fold the edges, glue one by one on the ring and set a star stud. Remember to cut the star’s pin edges or fold them in to make it flat.
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?