How to Make DIY Resin Easter Bunnies With Dried Flowers

Megan
by Megan
3 Materials
$7
24 Hours
Easy

Hi everyone! Today I want to share with you how you can make adorable bunnies with epoxy resin! Just in time for spring and Easter! The finished resin bunnies can be used as gifts in Easter baskets or paper weights! You can create two bunnies at one time!

Disclaimer: I own shopresinmolds.com. Yes I would love if you purchase the products in my shop. 😉

To begin you will need the bunny mold and dried flowers! The dried flowers and beautiful! They are all natural and do not bleed in resin!

Begin by mixing resin. Typically this is a one to one ratio. Equal parts of A mixed with equal parts of B. Mix for two minutes. Once resin is mixed pour a small amount into the bunny mold and place dried flowers into the mold. You can have fun with this part! As many or as few dried flowers as you would like!

After you have carefully placed dried flowers into the resin continue to pour resin in the mold until the mold is completely full. You can lightly press any dried flowers down that may have floated to the top with a popsicle stick.

At this point you are ready to let the resin fully cure! It will take approx. 24 hours depending on the brand of resin you are using. Once the resin has fully cured you can unmold your bunnies! This is the most fun part! Remove bunnies from mold and you should have two perfectly adorable bunnies!


Yay!! You did it! What will you do with your completed bunnies!? Leave a comment below!


To learn how to make your own resin bookmarks CLICK HERE

Suggested materials:
  • Bunny Resin Mold   (shopresinmolds.com)
  • Dried Flowers   (Shopresinmolds.com)
  • Epoxy Resin   (Amazon)
Megan
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
Next