XOXO Hugs And Kisses Sign
This is an inexpensive craft project using things from around the house. Colorful tape and metal washers make a great Love sign or XOXO sign for Valentine's Day.
I also used a piece of reclaimed wood for the sign base.
These tapes were hanging on the pegboard in our garage/shop. I don’t where the colorful tapes came from but I save everything and I buy fun things at the thrift store. You never know what will come in handy.
I started putting the project together using white buttons and found that they were too plain so I moved on to a different plan.
I finally went through my drawer of salvaged screws and metal pieces and found metal washers to work with. I used my glue gun to adhere the washers to the wood and I made X’s with the tape.
I decided to use the fuchsia and orange tapes to make the X's. I didn't measure the pieces. I just cut short pieces and stuck them to the wood.
One end of the reclaimed wood already had a couple of holes and I threaded a piece of thin wire into the hole to make a hanger. I used my favorite drill to make a small hole in the opposite end and threaded the wire through it.
Maybe you could help your grandkids make a similar project! You don’t even need any tools. The little sign is so light you could hot glue ribbon to the back of the wood sign to use as a hanger instead of the wire. And….you don’t even need hot glue. Regular glue would work just fine.
See more of my Valentine's and Love Signs here.
Enjoyed the project?
Suggested materials:
- Decorative tape (Hobby Lobby)
- Metal washers (Home Depot)
- Hot Glue (Walmart)
Frequently asked questions
Have a question about this project?