Mountain Shaped Holiday Card Rack
Do you get a ton of holiday cards in the mail? This rack is easy to make from plywood and is the perfect way to display your card collection. Adjust the measurements and make it as big or as small as you need for your cards each year!
Cut three strips of 1/2 inch plywood to 22 inches long by three inches wide. Use a jigsaw to cut a jagged edge on one side of each strip.
Cut a piece of 1/4″ thick plywood to 22 inches long by 2 inches wide to use as a base.
Stain or paint as desired. I used a grey colored stain for a rustic look. You could also paint it if you wanted a more realistic mountain look. Snow caps would be so fun!
Use a nail gun to attach the 3 strips together to the base board. Leave a 1/4" gap, just enough for cards.
The cards fit in each slit. With 3 boards, you have 2 slits for cards. If you have tons of cards, add more layers!
Here is how the rack looks. Cards go in the slots between mountains. Enjoy!
Frequently asked questions
Have a question about this project?