Bunny House

3 Materials
15 Minutes

We recently got a bunny and we needed to find a way to built her a tiny home so we had this idea to diy a cute hutch/hiding place

items you will need




Cut your dowels down to size.. if you want them the full length(dollar store ones) than I’d do that. You want to start in the middle of the cardboard and work your way out that way you can curl/shape it as you go! It also helps to “loosen” up the cardboard a bit before you start! I did this by just kind of rolling it out a bit and making it a bit softer.

Next you want to glue it on the cardboard and on the side of the dowel that’s way it sticks the best. Work your way out till the height and width desired. I used approximately 30, but she is a super small bunny.

Here she is with her house/hutch a little place she can go in case she gets scared and she sleeps in there as well.

Here you can see we attached her house to her ramp just with an air nailer ( this way it doesn’t move)

it was a fun project to add our own look to her space!!

Resources for this project:

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Frequently asked questions

Have a question about this project?


Join the conversation