DIY Valentine's Wooden Heart Riser.
Hi all! I'd love it if you created this simple Valentine's heart shape wood riser with me. 
Be sure to check out the video tutorial below
Materials needed
One Wooden heart (Target Dollar aisle)
Three large wooden beads
Diamond Gem wrap(Purchased at Dollar Tree. Sticky backing)
Paintbrush
Paint (I'm using a light pink)
Scissors
Faux Flowers
Adhesive
(E6000, Any will work)
Hot Glue
Start by taking your wooden heart, and applying pink paint to the front surface. It is entirely up to you, but you can also apply paint to the bottom side of your wooden heart.
You will need around two coats of paint when you are completely finished. Once you have applied all coats of the paint, set your wooden heart aside, and allow it to dry.
Next, take your three large beads, and apply some white paint to each of them. Set them aside, and allow them to dry.
Once your three large beads are dry, flip your wooden heart over, and take your adhesive, and attach all three beads to the bottom side of the wooden heart. Two on the upper section, and one down on the lower end of the heart.
You're now ready to add on your gem wrap. I picked my gems up at my local dollar tree, and they actually had a variety of different colors. I chose to go with diamond gems.
Start with cutting sections of your gem wrap. After cutting sections off, remove the paper backing off the back side of the gems.
Once the paper backing is off, gently press the gems down, and around the front section of the wooden heart. You will form the shape of the heart with your gems, as you apply them around the heart.
After adding your gem wrap, you can now start to add your faux flowers to your wooden heart. Take your scissors, or wire cutters, and cut sections of your leaves, and flowers apart.
Using a hot glue gun, add your leaves, and flowers to the bottom section of your wooden heart.
You're all finished. Adding your flowers, and leaves to the heart is the last step to complete this project.
You can add a small potted plant and a glass jar with an LED candle. It is simple, and so pretty when displayed. I hope that you have enjoyed this simple DIY project.
Be sure to check out my other DIY tray/risers projects below
DIY $8 Holiday Wood Risers. Build And Decorate
DIY Decorative Kitchen Tray Build And Decorate
DIY Decorative Autumn Tray
Easy Decorative Tray With Round Legs. -Build and Decorate
Pin/Share/Save
Comments
Join the conversation
-
This is so cute and simple to make, Thank you! If you are concerned with the spacer beads scratching your counter or tabletop put some felt circles on them. The felt is already sized in the package. I have used moleskin before and it works just as well. You just have to cut it to size. Moleskin already has sticky on the back. I think I'm going to do this one. ; )
-
I made this did a different idea. So easy and a fun project. Thank you for posting.
-
How wonderful!-- You're welcome, and it looks great!
-
Frequently asked questions
Have a question about this project?