Happy Spring Farmhouse Wood Sign Tutorial | DIY

To make this Hello Spring sign I used a frame from Dollar Tree and these pieces of wood.

And stained the wood with antiquing wax.

Step 1.

I took everything out of the frame and once the wood had dried inserted it into the black frame.

I put a line of hot glue around the inside of the frame and then pressed the wood into the frame.

Step 2.

I found this cute free-cut file at Design Bundles. I'll leave a link to the file in the description so you can get this free file.

After sizing, cutting the vinyl, and applying it to transfer tape I used this old gift card to apply the vinyl to the sign.

I actually messed up. I should have aligned the top 2 rows on the side because when I got to the next, longer row I had to apply it more towards the left side.

But hey, I still think this is the cutest spring sign.

Step 3.

I used my iron trick to get the vinyl to adhere to the wax and to give it more of a painted look.

I then used my weeding tool and pressed all the vinyl into the cracks in the wood. This will also give your sign more of a finished look.

And I ironed it again.

Step 4.

Next, I applied matte Mod Podge to the entire sign.

And just look at how cute this sign turned out.

Items Used:

Dollar Tree:

• Square Frame

Other:

• Design Bundles Free Spring Things Cut File
• Wood Slats

JOIN MY COMMUNITY to get FREE Printables and Special Deals only for my subscribers.

My Disclaimer: All of the video footage, photos, and designs are created by me and are owned by Designs By Gaddis. You may only use the video footage, photos, and designs with my permission. My content is mine and it is protected. I am not sponsored or paid by any of the product companies or tools shown in these videos unless otherwise mentioned. I have full rights and control of the content.

Copyright @ Designs By Gaddis 2021. Any reproduction or illegal distribution of the content in any form will result in immediate action against the person concerned.