Moss and Glass Glitter Banner

I wanted to share with you how you can make a moss and glass glitter banner for your home. I originally made one for Easter but I'll will show you a few other banners I made that might inspire you. You’ll love these Moss and Glass Glitter Banners in your home for lots of occasions.
Here’s What You’ll Need:
A roll of sheet moss
Hemp Twine
ChipBoard Letters
90 grit German Glass Glitter purchased from Meyer Imports Purchase at least 4 oz. for this project.
Mod Podge or Craft Glue
Hot Glue Gun
Start by unrolling your sheet moss mat and cut out triangles.
Once you have your triangles cut, flip your sheet moss over. It is connected by a mesh fabric on the back that you will need to cut a hole in to string your triangles together. Just a small slit will do. Don’t make the hole too big, you don’t want to rip the mesh on accident. Then you can string your triangles together using your hemp twine.
Next, you will need to glitter your letters. I used Mod Podge and a foam brush to apply the glue. Using a box or container shake some of the glitter over the letter.
By using a box you can reuse any of the glitter that doesn’t stick. You only need to do one side of the letters since the back side will be against the moss.
A little hot glue will attach the letters to the moss securely. And that’s it! You have a really cute banner for Spring!
Or Easter!
Or for Inspiration!
Or just for Fun!

Chic California
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

Comments

Join the conversation

 1 comment
Next