Sunflower Wreath and Loopy Bow Center Tutorial

3 Materials
3 Hours

This tutorial is for another version of my sunflower wreath as well as how to make my loopy bow center. I also show how I cover the back of the wreath at the end of the video.

The finished wreath is approximately 24 inches in diameter.

Materials needed for flower:

Cutting Mat

Rotary Cutter

Pipe Cleaners


10 inch box wire wreath frame

Poly Burlap mesh or Paper mesh of your choice (10 inch by 10 yard rolls. I do not recommend cutting down the 21 inch by 10 yard rolls because of excessive fraying)

Materials needed for center as shown:

1 roll of 1.5 inch by 10 yards wired ribbon, cut into twelve 30 inch pieces

Zip ties

Plastic canvas

Pipe cleaners


For the flower as shown, I used:

10 pieces of lime green cut 10 inches by 10 inches

12 pieces of fuchsia cut 10 inches by 10 inches

12 pieces of pink cut 10 inches by 10 inches

Video tutorial shows step by step how to make this wreath 😊

A blue and white winter version
A purple and white version
Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  3 questions
  • Lynne Rummel Lynne Rummel on Feb 08, 2020

    Is there a reason you use pipe cleaners versus wire or something else is it because it’s easier on the fingers?

  • Gayle Hamlett Gayle Hamlett on Feb 21, 2020

    can you use frey check on the ribbon so it does not frey?

  • Laury H Laury H on Apr 17, 2020

    Please tell me what supplies I would need to do this as a traditional sunflower! Bright yellow for summer...

    Thank you!

Join the conversation
2 of 4 comments