DIY Wood Riser (tray)

2 Materials
$20
30 Minutes
Easy
Love this DIY riser. Its so easy to make! I bought all my supplies at lowe's. The links are for Home Depot, they have curb side pick up so you don't have to get out of car.



Supplies:


1.  Table top

2.  legs

3.  stain (dark walnut)

4.  wood glue

5. craft white paint

6.  painters tape

7.  clear wax


If you're planning on using a light colored stain make sure you sand your board first, so it does't yellow. If using my same stain you don't need too. 








1. Stain your board & legs

2. Use your wood glue to attach the legs. My glue dried in 15 minutes. Make sure the legs are 1" from the edge of the board. You want to be able to see them once you flip it over. 

3. Use painters tape to create any design you like on the board. If you have Frogs painters tape that would be even better. Try your best to press the tape down as best as possible to prevent bleeding of the paint. 

4. When painting your board use a sponge brush and put a little bit of paint on it. Do not over saturate it. Dab the paint up and down on the wood. Do not paint like you normally wood. Just dab up and down. 

5. Let the paint dry and peel off the tape. Wait 24 hours and use a lint free cloth or rag to apply clear minwax wax. You can't over due it, just wipe off any access. 

Resources for this project:

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Jessie
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

Comments

Join the conversation

Next