How do i makea progressive picture ?

How large are the tiles and aprox how much do they weigh?

The size and weight will be determining factors in what hardware works best to mount them either together or on to the wall.

You could nail them or glue them to a board, depending on the weight of the tiles

Midge podge to adhere a photo that has been printed to the size and cut into thirds. Then you can hang in the wall.

Flip turn is right, the size and weight are important factors in how to create this project. If heavy and large, going into the studs might be an option to mount. If much lighter weight wood tiles, then other methods can be applied like gluing or command strips.

Hi! You could mount them individually on the wall or as you mentioned, together on a long board that accommodates your spacing. I use E6000 glue if I 'm permanently mounting something, or Gorilla glue. Gorilla glue also makes a two sided tape that I did a project with recently. It held my project together while the glue dried. If the tiles are light, you might consider Command strips. Good luck!

Hello. You could have a photograph printed up and slice it into the segments of your tiles.

You could use photos or prints and use mod podge to adhere them to the wood.

What is a progressive picture? Meaning a continuation of the same picture carried onto 3 different tiles?

You could glue them measure so that they are evenly apart.you could put pressed flowers in between or small wood cutouts painted doller store has some cute ones in the teacher section.

Do you mean a Triptych?

Perhaps a wooden or metal frame to mount the tiles on....

You could build a frame to adhere the tiles to or support, or find a shadow box type frame.

It possible for you to use midge podge to glu them or just nail them down.