Pottery Barn Mirror Hack

5 Materials
30 Minutes
Have you seen these mirrors? I love them and want one but holy cow! $299 and up for these and that is just not in my budget. I created a Pottery Barn mirror hack using Dollar Tree mirrors.

Here is the picture of the original at Pottery Barn. It goes for $299!
I ran to Dollar Tree and purchased 9 mirrors, and 2 pieces of black poster board. Total - $11
I laid out my mirrors on my table, mirror side down so I could work on gluing them together.
I started with a little E6000 gluing all the creases between the mirrors. After letting that dry I also glued over all of the creases with hot glue.
Once the hot glue was dry and cool, I added a piece of gaffers tape along each of the lines and in a giant "x" to add strength.
I cut my 2 pieces of black poster board so it would fit the back of the mirrors. I hot glued the poster board to the back of all the mirrors for extra strength and a solid back.
Here is what it looks like after I finished it. It can go vertical or horizontal.
I used 4 command strips to place it on the wall. You can find the kind of Command Hooks and how they work on my Hometalk tutorial here - http://www.hometalk.com/diy/organize/storage-...

I love how it turned out!
I would love to have you stop by my blog    Chas' Crazy Creations  for the full tutorial as well as sign up for my latest creations, posts, recipes, exclusives, and more...

I would love for you to subscribe to my YouTube channel to see more of my crazy creations - https://www.youtube.com/channel/UCIOsMN7hycVRco-MROXwmXg
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Chas' Crazy Creations
Want more details about this and other DIY projects? Check out my blog post!
Frequently asked questions
Have a question about this project?
3 of 65 questions
  • Patty Patty on Dec 20, 2020

    3 of the mirrors did not have the same frames as the others. How did you fix that?

  • Ann Baxter Ann Baxter on Dec 21, 2020

    I wonder how it would work to use a piece of luan for the backing? Its pretty inexpensive and stronger than poster board. I like your mirrors.

  • Heather Heather on Mar 17, 2021

    I'm making this now. However I wanted to know if you waited the 24hours as directed on the E600 glue before you hot glued over the creases?

Join the conversation
2 of 757 comments