No - Sew Cushion Covers
My husband and I recently purchased a pop up camper! We were so excited to buy this and turn it into a fun little project! One of the main things I wanted to do was recover the cushions, but after looking into it a little more, it is expensive! I didn't want to put a ton of money into the seat coverings since we had just purchased the pop up itself, so I knew I had to come up with a cheap solution for now! On top of my low budget, I do not sew! So, we had to think outside of the box!
You'll need a sheet (pick any color, pattern, and material that you'd like), scissors, and lots and lots of 2in safety pins.
Lay your cushion on your sheet. Measure where you'll cut by folding up the sheet, and allowing a 2" border of material all around the cushion.
Cut your sheet to size.
Pin your fabric in place. Start on one side, and add a safety pin every 2" inches.
Once you have one side done, make sure you push your cushion and pull your fabric to ensure it is nice and taught (kind of like a Christmas present).
Once you get to a corner, pin the sheet tightly. Make sure there are no wrinkles.
Fold the corner, and bring it up over the cushion. This will be similar to wrapping a present.
Pin your folded fabric on place. Make sure it is tight.
Tuck and smooth your corner. Add extra pins where necessary. Repeat these steps for each side and corner.
Flip your cushion over, and put it in place! I did this on all of the bottom cushions in my 2005 Palomino Yearling Popup Camper.
Comments
Join the conversation
Iron on tape works well and is very efficient.
What about using hot glue.