Learn How to Copper Leaf a Pumpkin

Cindy Rust
by Cindy Rust
5 Materials
$30
1 Hour
Easy

Have you ever wanted to learn how to copper leaf a pumpkin? I’ve wanted to try this project for a long time and today we are going to learn how to copper leaf a pumpkin! Let’s get started!


If you need any supplies or tools, I have gathered some links for you! Thanks for shopping via the links. It really helps to support my blog and the free tutorials we offer here. If you purchase via our links, we do receive a small commission at no additional cost to you! Click here to read the full disclosure. Thanks so much!

copper leaf pumpkin tutorial


Do you like to learn new things?


I do.


In fact, I love to learn new things. I’m kinda obsessed!

Especially when it comes to any kind of project that we do here at Reinvented Delaware.


That reminds me – did you see this adorable pumpkin project made from thrifted sweaters? Some of those pumpkins are cashmere!!

Thrifted Sweater Pumpkin

Let’s take a look at the supplies we need for these adorable copper leaf pumpkins.


list of supplies:


  • craft pumpkins
  • copper leaf
  • metal leaf adhesive
  • metal leaf brush ( or use a craft paintbrush)
  • craft paint in a copper color
  • craft paintbrush

step one: paint the pumpkins


When my craft pumpkins and other supplies arrived from Amazon, I could hardly stand to wait to begin!


The first pumpkin I applied the copper leaf to wasn’t painted first. That was a bad decision on my part because the copper leaf tore in many places and the white background was visible in the cracks.


So I decided to paint the pumpkins in a copperish (terra cotta) color first. I applied two coats of craft paint and then I applied one coat of the metal adhesive.


step two: apply the adhesive


The instructions on the metal adhesive bottle said to let it dry for at least 30 minutes until it is tacky.


The copper leaf is very lightweight and tends to fly away. I suggest you do this step in a room without much traffic! Even someone walking by the copper leaf could cause the leaf to fly away!

step three: apply the copper leaf


Instead of lifting the copper leaf towards the pumpkin, I took the pumpkin to the copper leaf. You’ll see this more clearly in the YouTube video below.


I also found that using my finger to gently press the copper leaf down was easy. Very carefully, I moved around the pumpkin, smoothing the copper leaf with my finger as I went.

I also used scraps of the leaf to fill in the small areas of the pumpkin.

please pardon the blurring screenshot from the YouTube video!!

step four: remove the excess copper leaf


Once I moved all the way around the pumpkin, I used the metal brush to gently brush away the excess. Hold the pumpkin close to the tabletop you are working on so that the copper leaf doesn’t fly away!

step five: fill in the gaps


Remember I said that there were white areas of the pumpkin that were visible? The same happened with the painted pumpkins, but the areas were less noticeable.


To cover them, I used a small brush to apply more metal adhesive, allowed it to dry, and then used the leftover flakes of copper leaf to cover the exposed areas.

The scraps left over from brushing away the excess copper leaf were put to good use! We don’t like to waste around here!

I finished all of the pumpkins in just about an hour. Then it was time to decorate with them!


**When researching this copper leaf pumpkin project, I read that many crafters gave the pumpkins a top coat of shellac to prevent the copper from tarnishing. I don’t show that in this tutorial, but because so many recommended it, I will give my copper leaf pumpkins a shellac topcoat!

Enjoying this post? Want to see more? Sign up below to receive new posts!



decorate with copper leaf pumpkins


One of my followers suggested I put a pumpkin on top of the easy cake stand I made a couple of weeks ago. Wasn’t that a great idea?


Look how cute these copper leaf pumpkins look on the cake stand!

easy fall centerpiece


Let me break down this simple table centerpiece for you.


I first laid down a gorgeous grain sack bag that my sweet friend gave me. Check out her blog for some vintage goodness!


I laid the grain sack out on a diagonal to add interest.


One of my large ironstone platters went on top of the grain sack.

Next, I placed the cake stand (be sure to read the post on that easy thrifted project!) in the center of the table.


I have been picking up brass candlesticks here and there as I have been out thrifting. The mismatched pieces are just the kind I like and it’s easy to find single brass candlesticks!


Then I added some collected taper candles in varying shades of faded red and orange.

The craft pumpkins that I purchased came with real pine cones and faux acorns that look real so I added them to the ironstone platter and cake stand.

I forgot to mention that I also added some berry garland that I have had for years. The garland came in a 6′ long strand and I have used it in many ways. This time, I took the sections apart and used bits of the garland around the pumpkins.

easy fall decorating ideas


Aren’t the copper leaf pumpkins so pretty?

I realize they could have been purchased with the copper leaf already on them, but I really enjoy making my own decorations when I can. The decorations are enjoyable and help to make our home cozy. But the crafting side of it helps to add a special touch to our home.


Crafting therapy is good for the mind and soul!


I encourage you to try this project for your home! Metal leaf comes in a variety of colors like gold, silver, and of course copper. Let me know if you make this project for your home! I would love to know how they turn out for you!


FAQ’s


How to apply copper leaf?


As you can see, applying copper leaf is simple: apply the metal adhesive and allow to dry, add sheets of the leaf to cover the area, smooth the surface and brush off the excess with a soft brush.


What adhesive can I use for copper leaf?


My suggestion is to use the product specifically for copper leaf. The metal adhesive dries to a tackiness that allows the leaf to adhere to it easily.


How do I seal copper leaf?


I did not seal my copper leaf pumpkins in this tutorial, but after researching, I have decided to seal the pumpkins with natural shellac. I like Zinsser Shellac in clear for many of our other projects, and since I have plenty on hand, that is what I will be using!


If you have any other questions about copper leaf, please feel free to ask in the comments below! I will do my best to answer!

Sometimes watching the process makes it easier to tackle a new skill so I made a video for you! This was my first time using copper leaf (or any metal leaf for that matter!) So let’s learn how to copper leaf a pumpkin together!


By the way, I have plenty of copper leaf sheets leftover, so I am looking for more ideas to use them on!


YouTube Video Tutorial

Pin the image below to your home decor and and fall projects boards! Just click the pin button at the top left corner!

Thanks for joining our journey!


We would love you to join our journey over on Instagram and Facebook! You can also find more inspiration on our Pinterest page! We’re always pinning fresh ideas!


Want more ideas to reinvent? Sign up below and I will send you a list filled with inspiration! Plus, you’ll get the free tutorials sent straight to your inbox!


Until next time…

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Cindy Rust
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  1 question
  • Em Em on Sep 03, 2021

    pretty but could you get the same effect from copper colored spray paint for much less? I see the adhesive from $9-$15 and the sheets the same price.

Comments
Join the conversation
3 of 9 comments
  • Kathy Kathy on Sep 26, 2021

    I’ve wanted to try this myself. Great results!

    • Cindy Rust Cindy Rust on Oct 25, 2021

      Thanks Kathy! You will have to much fun making this project! Happy Fall!

  • Lynn Lynn on Sep 03, 2022

    Many, many years ago, I gold leafed (leaved?) a picture frame and a ceramic cornucopia. The gold leaf at that time could be bought separately, I think, but the base layer (dark, reddish brown) and adhesive were sold together. I really enjoyed doing it, and both pieces looked amazing.🙃

Next