How do I know which standoff screws to use?
I have a pic between two pieces of acrylic. I know there are standoff screws which would be great if were smaller. Is there ANYTHING else to use that would look good too. My pics are from 4x6 to 11x14. I dont want to put a lot of holes in my walls or others. Thanks again. I just get frustrated not being able to find what I need n finally finish a project. Okee dokee
Related Discussions
Does anyone know what glue I could use 0n deer antler material??
I have an Eskimo carving of a bird with a long thin neck (very slender). While it was being transferred the neck broke. The carving is made of deer antlers.
How do I open this tube?
The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ... See more
Do all sewing machines have a presser foot tension regulator?
I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi... See more
How can I stiffen crepe paper?
HelloIs there anyway I can stiffen crepe paper leaves?
What type of saw and blade's do i need to slice/ cut agates?o
How do you glue the plastic that water bottles are made of ?
What kind of glue works with polyethylene plastic ? I have tried many kinds with no success.
How about using 3M Command hooks or tape. You can check their products and see if they have anything you can use
thnx katie good idea.
I have no idea what they are called but check out the screws used at the end of the perspex project. They would look great on your project. https://uniquecreationsbyanita.com/led-headphone-stand/
Command hooks are the way to go if you don't want holes in the walls, Katie.
I don't know if it helps but I have been using Command Strips meant for pictures with pretty good success. You can see them here - https://amzn.to/2TQl3XA
Hi katie, how about a picture hanging rack? It allows several pictures to be hung on it and at different heights if you prefer, hope this gives you soemhelp,
https://www.youtube.com/watch?v=H8LSheYiDgg
Hey Katie, how about mirror clips? They may work for you, I have attached a link for you to check out,
https://www.amazon.com/Yardwe-Mirror-Bathroom-Hanging-Accessories/dp/B07QX4WYX9
https://www.amazon.com/MTMTOOL-Floating-Wall-Mounted-Bathroom-Supporting/dp/B081SY6NV3/ref=pd_day0_hl_201_7?_encoding=UTF8&pd_rd_i=B081SY6NV3&pd_rd_r=77b9da2f-0e5a-458c-ab74-baff585af869&pd_rd_w=eKiMf&pd_rd_wg=5WNCs&pf_rd_p=531c5da2-92c8-47a3-8df6-cb5fa8f00603&pf_rd_r=00DTCJY2Q3SXAJN1JNFP&psc=1&refRID=00DTCJY2Q3SXAJN1JNFP
Hi! I was looking at fasteners that might work for your project. Just a thought, but, what about mirror clips like these?
https://www.amazon.com/dp/B07H9NC9SF/ref=sspa_mw_detail_6?psc=1&pd_rd_i=B07H9NC9SF&pd_rd_w=P8EYJ&pf_rd_p=d00bbee1-7e15-4077-bce3-90f05c1dc9a0&pd_rd_wg=3JMc4&pf_rd_r=DQPDZNQ0K52S1FRK24N1&pd_rd_r=bba2e149-afa1-4a1b-a089-f5e47534e6bc&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzM1hXSkxKTEdWVENKJmVuY3J5cHRlZElkPUEwMzc1MDAzMTY3ODlTOUFBQkhCUCZlbmNyeXB0ZWRBZElkPUEwNzg3NTg5MkE2MjRTN1ZJM0lMRCZ3aWRnZXROYW1lPXNwX3Bob25lX2RldGFpbF90aGVtYXRpYyZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Hi Katie, you can use "mirror clips" or "concealed mirror clips". These can be used to mount flat items to a surface without requiring holes etc in the piece to be fastened in place. Just look for mirror clips on Amazon and you'll find a whole bunch to choose from. Hope you come right and finish off your project.
I got my standoff hardware on Amazon!
I use command strips for my heavy pictures, they don't create holes in wall. Get the durable ones. Here is a link to https://amzn.to/39J5F6a