Is Rub 'n Buff waterproof?
+8
I've seen some amazing projects on here using gold Rub 'n Buff on faucets and other bathroom fixtures, and I want to try it myself. But do I need to seal it with polyurethane or similar?
This project uses polyurethane on top of gold Rub 'n Buff, whereas this one doesn't.
If Rub 'n Buff is wax, then it should be waterproof, right? So is the polyurethane just a precaution?
Related Discussions
Suggested Project Book
I've never used it. Since it is a creamy wax polyurethane would not stick to it or seal it. I would say it's a decent temporary fix. I also would say it's water proof. My only concern the packaging says for porous surfaces. The second project they were planning to replace the faucet in the future so it was a temporary fix. It did leave water marks. Give it a try. It's wax that can be removed.
I've not used anywhere that it would need to be waterproof but I would think it's more water repellant. Perhaps a water based poly would be better. Another thought would be to paint with a RustOleum "metal" spray.
Had you thought to use a metal paint such as Car paint. would need a n undercoat I should imagine.
Once the Rub n' Buff has cured (dried) well, the oil-based poly should adhere well and provide the protection from being worn away by use. I'd go for it and follow the instructions provided. Most any surface wears away over time and then could be repeated if wanted.
This DIY uses a poly to coat a sink faucet. https://www.hometalk.com/diy/paint/turn-chrome-faucets-gold-with-rub-n-buff-44473075
Turn Chrome Faucets Gold With Rub N Buff
Rub 'n Buff is popular to use on faucets and other bathroom fixtures, so it is definitely water resistant. However, a coat of sealant adds an extra layer of protection. I think of it like shoe polish; it will wear over time, but then you just reapply. More info here: https://www.hometalk.com/diy/decorate/how-to-use-rub-n-buff-44846593
Yes! Rub 'n Buff is a metallic wax that repels water. Don't seal. If you're worried about it rubbing off, take a soft buffing cloth and buff all the armor really hard. That should help speed up the process. Then let it sit for a week and it won't be a problem after that
Hi Danielle: I've never heard of this before, but it sounds great. I found a site that may help you: Rub 'n Buff Colors & Tips: Changing Metal Finishes the Easy Way! - Driven by Decor
Good luck
Shouldn't think so, unless sealed.
It is a wax but I wouldn’t say it’s waterproof. If it’s used on something that sees wear and tear or requires more than a dusting to clean, it will wear away,
it’s not a permanent fix. Because it’s a wax, polyurethane, or any sealer really, won’t stick to it.
I think it's water resistant, not water proof,