Ideas for how to attach a sink skirt?




Related Discussions
How do I open this tube?

The end of this tube is very hard. I slightly tried to punch the end of a knife into it and also tried a large paper clip but neither budged it. I was a bit timid in ... See more
Do all sewing machines have a presser foot tension regulator?

I am a mid to intermediate level seamstress. I've had two machines over the past 40 years, a Kenmore, followed by a White sewing machine, both very nice sewing machi... See more
How can I stiffen crepe paper?

HelloIs there anyway I can stiffen crepe paper leaves?
What type of saw and blade's do i need to slice/ cut agates?o

How do you glue the plastic that water bottles are made of ?

What kind of glue works with polyethylene plastic ? I have tried many kinds with no success.
What is the best glue/adhesive for adhering plastic to metal?

Need to glue a round plastic reflector to a metal mailbox. Gorilla Glue didn’t work.
Use the rough part of peel and stick Velcro on the sink and then buy some sew on type Velcro and sew the smooth part of it to the skirt.
Rymea is right try Velcro.
Any way you could use a tension bar and put the rod through the hem of the skirt? The rod would be end to end with the existing walls and just under the sink.
Another idea for a skirt would be the curtain with grommets-no sew.
Many stores have leftover pieces that might fit perfectly.
Use a tension rod right under the edge of the sink or just behind the bottom edge of the sink.
Velcro would be a great solution
If you are wanting doors this site might help. She builds most things with a kreg jig. For your project you would might only need to make the front part of this cabinet.
http://www.ana-white.com/2012/01/plans/kitchen-cabinet-sink-base-36-full-overlay-face-frame
http://www.ana-white.com/plancatalog
try two sided hook and loop tape
You can use adhesive Velcro to attach the fabric to the sink