DIY Funny Phone Holder
by
Troom Troom
8 Materials
$2
60 Minutes
Easy
If you are still missing such a functional accessory as a phone holder, it’s the right time to get it. You just can’t stand making a funny little crab we are going to show.
{
"id": "3888026",
"alt": "",
"title": "",
"video_link": "https://www.youtube.com/embed/lgVLUd3GkI8",
"youtube_video_id": "lgVLUd3GkI8"
}
{
"width": 634,
"height": 357,
"showRelated": true
}
Check out the video above to learn how to make your own!
Start with the template. Draw an amusing crab. You’ll see it’s easy. Or you can print out an image you can find in the internet.
Trace the crab to make the middle part.
Mark off your phone to make the cutout.
We’ve traced the templates on corrugated cardboard. Cut them out with the craft knife.
We’ve made eight details.
Hot glue the same details. You can use multipurpose glue instead.
We’ve sandwiched four middle details with a phone pit between the four face details.
We’ll decorate the crab with the deep red velvet paper. You can also use foam rubber sheet or thick fabric.
Measure the holder. Cut out the paper strip of the appropriate size.
Place the paper on the holder and press down all the indents with a pencil.
Apply the hot glue to the notches. Press over.
If one strip is not enough, attach another one.
Cut out the phone pit. Make the missing details
Hot glue.
Keep in mind the funny face.
You can attach the eyes and smile with stationery glue.
Define the details with a black marker to apply a cartoon effect.
The comic little crab will hold you phone safe and secure. It’s so cute that it may become your favorite accessory.
If you're like this project, check out our youtube channel OR our super cool website
Thanks so much for reading/watching!
Frequently asked questions
Have a question about this project?