Most of us have it and so many times we wish it would not be in our photos…a TV! There was something exciting that happened last week at my home and before it happened I wanted to make sure that piece was hidden. I will be the first to say that I love having my tv but, it is not picture friendly.
DIY Hide a TV
- For example my TV was 36W X 22H X 5 1/2 D
- Now my sign is way larger than my TV, which is totally fine. The covering piece just needs to be at least 2 inches larger than your TV.
- Depending on the size of your TV will determine what boards you will use. I do suggest using at least 1X4′ boards
- Cut your boards to build your frame to the size of your covering piece
- (4) boards cut to 2ft(2) boards cut to 8ft
- Take (1) of the 2ft boards and put it perpendicular to (1) of the 8ft boards. Once you have them flush together you will take 2 wood screws and screw the boards together.
- Once those two boards are connected you will then take (1) of the 2ft boards you have left and screw it together at the other end of the first 8ft board.
- Now take your last 8ft board and connect it to the rest of the frame.
Since my sign was so large, I cut two more 2ft boards to use a braces inside of the frame so it would not bend in.
Stain your wood with your choice of wood stain color. Wait about an hour for the stain to dry. Once the stain is dry, you will then add your hinges.
Attach one side of your door hinge to your built frame
Once these are attached take your cover piece and attach the other door hinge to the top of this piece. This will then create a way to open the covering piece.
Finally the last step is to open the covering piece to the full upright position and measure the distance between the sign and the frame. This is where you will put your dowel rod to hold the sign up.
- Once you have the measurement you will cut the dowel rod to that length.
- You will then make a pocket hole for the dowel rod to go in.
- At one end of the dowel rod you will want to make an angel. This will be the part that holds up you sign.
- Add a small piece of wood onto the back of the sign to be a stop for the dowel rod. ( I used a nail gun to attach this)
Now you have a beautiful view to photo but, still have a functional way to watch your TV on a daily basis.