DIY Planter Using Foam Sheet
Upcycling plastic reduces the amount of waste that gets to the landfills. Using this waste plastic into something creative, not only helps the environment to reduce it's waste, but also helps us to be a little more creative in using our ideas to beautify our garden. So let's make a planter using foam sheet and a container of your choice.
Step 1:Rinse and clean any container of your choice.
Step 2: Paint the entire surface using Matt Chalk Paint.
Once painted let it dry completely.
Step 3: Take a foam sheet and draw lines using a marker as shown below.
Step 4: Draw lines as shown and cut it using a scissors.
Paint the edges as shown I have used brown Acrylic Paint.
Start sticking using glue as shown below.
Stick the foam pieces as shown. Using yellow and brown Acrylic Paint paint the foam pieces.
I have used yellow and brown Acrylic Paint to give it a highlighted look.
And your DIY Planter Using Foam Sheet is READY!!!
This planter can be used in 3 ways;
- You can make a hole at the bottom and plant your favourite plant in the planter.
- Without making any hole to the planter, add water and some plant cuttings making it a propagating planter.
- Can directly add potted vase and let water drain in the planter itself.
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Deborah on Aug 09, 2023
You've done a wonderful job, the planter looks fantastic and you're helping with our environment for the next few generations..
-
Deborah | upgardening on Aug 21, 2023
Thank you 😊
-
-
-
-
Deborah | upgardening on Aug 21, 2023
Thank you 😊
-
-
-
Frequently asked questions
Have a question about this project?
What kind of glue did you use?