How to Make a Charcuterie Board
Hey Hometalk! I’m making a few boards with epoxy and a few without! These are real easy to make with a jig saw🙌🏼🙌🏼 These are great gifts, or to keep for your own kitchen.
First, I laid out a pair of walnut slabs and drew a board idea on them with a piece of chalk. These seemed like they’d make a good pair!
Them I clamped them down and used my straight draw to get the bark off the inside of both pieces.
Bark free on the inside🙌🏼
I put Tyvek tape on the bottom and up the sides to hold in the epoxy. Also, make sure everything is level 😜
I used a jig saw to cut my shape once the epoxy cured.
I didn’t love the straight lines so I rounded it a bit more and sanded the top to 120.
I used my painters tape roll to give me my curve🙌🏼
Bam! Monster. Now for the wine and cheese🥳🥳
Hope you like 'em, to see more of what I do, check out my Instagram- Sawdust & Whiskey or my Facebook page- https://www.facebook.com/sawdustandwhiskey/
Resources for this project:
See all materials
Comments
Join the conversation
-
Wow, wow, wow!!!
-
gorgeous!
Frequently asked questions
Have a question about this project?
Very nice but is it non toxic?
It looks great!!! Could you have trimmed the wood instead of putting in the epoxy??