Want a new way to display your family photos or recent vacation? Try making these easy photo coasters using some left over canning materials, resin, and your favorite photos.
You really do not need a lot of materials to make these coasters. I know canning materials are in hot demand or at least they were in September when it was canning season, lids and rings were hard to come by. If you do any canning at home you can use new ones that were left over or wash up your used lid and reuse a ring. You can use wide or regular mouth depending on how big your photo is you want to display. I used wide mouth lid and rings. Here is the material list:
- Canning Lid and Ring
- Resin kit
- hot glue gun
I have a photo printer that I got with my digital camera so if you cannot print at home you can always get cheap prints at Costco, Shutterfly, Walgreens, Walmart, etc.
First thing you do after you select your photo is put your lid over top of the subject you want to showcase. Use a pen and outline around the ring.
Now that you made your pen line just use a pair of scissors and cut around the line.
I didn't get a picture but you will want to hot glue your lid in your ring to prevent the resin seeping out the bottom when you get to that point. The hot glue will help create a tight seal on the bottom.
When your lid has been glued in, slide in your photo you cut out.
Follow the directions of the resin to start your mix.
This was my first time using resin and you do have to go slow to prevent air bubbles from creating. I didn't read that the first time and ended up having to make another mix. Learn from me and read all the instructions if you haven't worked with resin before so you don't waste material like I did.
Put your photo coaster on a paper plate in case some resin does seep out, it won't be stuck all over your countertop. Pour your resin in and let it be for about 24 hours. I poured my resin just shy of the top of the lid.
Once it is dried, set it out on your side table and get ready to get some compliments! You could spray paint the rings to match your decor. I chose to stick with the original gold ring because with my fall photo it seemed to go well together.
My husband needed one to rest his Dr. Pepper on when he is watching his favorite team this fall. For the football coaster, I just kept the original silver ring. You can cut out a piece of felt and put it on the underside of your coasters if you don't want people flipping them over to see the "Ball" logo or whatever canning brand you use!
I just had a comment from one of the Hometalk viewers that suggested looping ribbon on the back of the coaster and using these for Christmas ornaments! What a great idea! These also have a little bit of weight to them so you could also use them as a paper weight in your office - if anyone uses those anymore, maybe a fun way to make placecards / gift for your dinner party...I love to hear what you would use yours for! Have fun creating this project!
Resources for this project:See all materials
Sherry on May 09, 2021
Did you print glossy or matt pictures? Does it matter? I wondered if the resin would take off the picture finish. I thought about making these for my grandsons graduation party, all with pictures of his high school sports moments. Them sit them around the room for the guests.