How can I remove this lettering from this bottle?
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
Can you remove raised writing from wine bottles? If so, how?
How do you remove labels from prescription bottles?
Any suggestions for removing RX lables from bottles? The lables circle the entire bottle. Would like to use them for spices, and cookie sprinkles I buy at a bulk fo... See more
How can I remove Plaster of Paris from molds?
I'm interested in taking molds that are used to make ceramics and use those molds for plaster. I know that the molds have to be sealed with shellac, which I have done... See more
How can I remove a decal from a drinking glass?
I have some drinking glasses that came with decals and would like to remove them. Can anyone suggest a way to do this if it is possible?
How can I remove hot glue from Popsicle sticks without breaking them?
I made three arrows from Popsicle sticks to hang on the wall and I want to stain them. I know I should have stained them before hand, but I didn't. I need to remove t... See more
You can try using the highest grit sandpaper that you can find, but generally speaking , once a surface as hard as glass is etched , its there for good .
Try soaking in cider vinegar for about an hour. Place some paper towels soaked in nail polish over the lettering.
Try looking for videos, that tell you how, and what material you need for polishing marble. It will require some sort of motorized circular buffing wheel.
Sometimes these labels are just glue on and a good soak over night in some vinegar will remove it. Some are printed on. Give it a good scrub and see what happens.
What about etching cream to etch over the printed material
Don't know if it can be done. I also love interesting bottles but to me the printed design is part of the charm. At least most of the time! The one you show seems quite pleasant!
I could be wrong, but it looks to me like you have a label attached to both sides of this bottle. If so, I suggest you use hot water inside - put inside microwave for a minute or so to soften the adhesive and remove. You might have to do one side and then the other as you will most likely have to lay the bottle down on its side. Once the label is removed, used goo gone to remove remaining adhesive.
Thank you for all your responses. I'm going to try them one by one and hopefully one will work. Cheryl
Sounds easy enough to try. I hope it works. Thanks so much.