Resin Coasters DIY With Buttons

2 Materials
$25
24 Hours
Easy

Making a handmade coaster is a great way to create something with tons of personality and character. I am super excited to show you how to make adorable coasters using buttons. Buttons are awesome because they come in bazillions of colors, shapes, sizes and styles. They can be assorted to feature team colors, school spirit or whatever combinations brings you joy. I find joy in the assortment of mixed matched brightly colored things. Let’s do a resin coasters DIY with buttons!

Materials and Supplies Needed


Directions

Firstly, make sure all molds are clean. This is important to keep any debris or yucky stuff on your project. The molds should also be dry. It is a good idea to select your buttons before you start too. Button Jam has so many amazing ones that this might take some time! Note that some of the buttons might be too thick for the coaster!


Step One

Secondly, mix the EasyCast Clear Casting Epoxy. Pour EQUAL parts from each bottle supplied in the box into the mixing cup. The more coasters you plan to make – the more you will need. Neext, slowely stir the mixture with the stirring stick for about two minutes, scraping the sides. To get the best results, pour the resin into a new mixing cup and stir for an additional minute with a new, clean stirring stick. Be sure to work in a well-ventilated area and wear disposable gloves.


Note to beginners – start by making a single coaster to get the feel for this type of crafting. This will set you up for success with your coasters project.

Step Two

Pouring the resin into the mold is my favorite. Pour a thin layer on the bottom of the mold.

Step Three

Place your buttons in the thin layer of poured resin. Know that they are going to shift a little when more resin is added but take the time to get it close to what you like. Resin is a bit of a reveal craft – meaning that it might change a little when it sets.

Add more resin to the depth you would like your coasters to be. Use a stirring stick or a toothpick to adjust buttons that might have shifted. If there are any air bubbles, go over them with a heat gun or a lighter and they will disappear.


Step Four

Let the resin sit for at least 24 hours to completely set. Then remove from the mold. This is the most rewarding part of the project for sure.

Enjoy your coasters! They are perfect to use indoors and outdoors. I really love the back side of this one too.

How to Clean A Resin Coaster

If you need to clean the resin coasters or give them a light polish, try a damp microfiber cloth. You can also clean it with a mild dish soap and water but dry it right away. The resin is water resistant but not waterproof.


About Button Jam

Button Jam buttons come is adorable little jars (that are perfect for upcycling in to fabulous projects). Each jar contains a color of buttons that come in many hues and sizes. The variety is never the same, making the experience of opening and sorting the buttons a joy. The buttons are made from thousands of different molds so the range of choices is broad including vintage styles.

YAY for Resin Coasters DIY Fun with Buttons!

Laura

Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Laura Kelly Designs
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
  2 questions
  • Cindy Rubin Cindy Rubin on Apr 18, 2022

    Hi! Love this.... I have sooo many buttons.

    You mentioned that the resin is water resistant but not waterproof. Will the coasters hold up to the condensation from drinks set on them?

  • Teresa Ann Lennon Teresa Ann Lennon on May 14, 2022

    Could you put a picture in them

Comments
Join the conversation
 4 comments
Next