Super Easy No Wire Under Cabinet Lighting Solution
Illuminate a shelf, counter top, or any space with this super easy no wire under cabinet lighting solution.
Super Easy No Wire Under Cabinet Lighting Solution
If you have been around here for any length of time, then you know how much I love coffee.
Every morning around 530am I enjoy a freshly ground and brewed cup of coffee at our coffee bar.
In an effort to decrease the number of times I have accidentally poured coffee on my hand due to the lack of early morning light, I added a simple, cost-effective, no wire solution.
Super Easy No Wire Under Cabinet Lighting Solution
This is the motion sensor LED light strip! So easy to install.
These lighting strips are the easiest solution!
Here is the before.
My intent was to install 3 strips above each of the shelves and the countertop.
1. Install 3 AA batteries.
2. Turn the light on and determine proper placement for optimal illumination.
Be sure to make a notation where the magnetic strip should be placed.
3. Remove the magnetic piece from the light.
4. Remove the sticky tape backing from the magnetic piece.
5. Press the magnetic piece to the shelf to adhere.
6. Attach the light to the holder.
After
Voila!
Pin any of the images below for later!
Frequently asked questions
Have a question about this project?
Did you clean the wood before attaching the magnet?