Upcycled Football Vase

3 Materials
$25
1 Hour
Easy
Looking for a clever centerpiece idea for your Superbowl party? Why not upcycle an old football into a vase?
With Superbowl nearing, this DIY project is one that will even make Tom Brady proud. Yep, I deflated a football. Then I upcycled it into a very cool vase to use as a centerpiece for my Superbowl party. Here’s what you need:


  • football
  • glass vase (about 10″ tall)
  • scissors
  • flowers
STEP 1 – DEFLATING THE BALL


This step is simple – just cut the ends off a football. If you have an old football that you can upcycle, go for it. I think some wear & tear on it will give it a cool vintage vibe. However, I just picked a new one up at Target for less than $10.


Next, I placed the vase upside down on one end of the ball and marked the opening. (The photo shows a cup instead of a vase, which would work fine.) Using a pair of scissors, I then cut along the lines. Once I had cut through the outer layer, I deflated and removed the rubber liner.
STEP 2 - CUTTING THE BOTTOM


Now cut about 3″ off the bottom of the ball in the same fashion. 


STEP 3 - INSERTING THE VASE


I first tried using a large plastic cup as a vase but later found an inexpensive glass vase at Michael’s. I inserted the vase into the football shell through the largest opening (top). It’s okay to remove a few stitches from the top of the seams of the ball to better fit the vase.


STEP 4 - ADD FLOWERS


Fill the vase with water and add flowers. Don’t worry if the top is not cut perfectly straight or if the vase is taller than the ball, as you can add more flowers to flow over the top. 
Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Wendy at myfrenchtwist.com
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
 4 comments
Next