Add Wainscoting to Walls Using Pallet Wood

Get the look of wainscoting without the cost.
To start off, I nailed the top boards to the studs in the wall at the desired height. I also applied builders adhesive to the back of the boards.
Next, I added the second row. I measured and used a level to keep the distance the same along the wall.
I then added boards connecting the two boards.
Next, I added the lower vertical boards.
Using a caulking gun and paintable caulking, I filled all the holes, knots and cracks. I then added a bead of caulking where the boards met and along the sides of each board.


After everything was filled in and dry, it was time to paint.
I’m loving the new look. It’s not perfect, by any means, but I works.


The only items I had to purchase were the adhesive, caulking and paint.
Andrea Fogleman
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
Comments
Join the conversation
2 of 4 comments
  • Linda L Linda L on Jan 14, 2015
    That is perfect and well done!! Making plans for the kitchen!!

  • Tol13135882 Tol13135882 on Apr 09, 2021

    I absolutely love this! I can’t believe hometalk didn’t hype this up more, it’s awesome!! Thank you for sharing!

Next