How to Paint Wood Paneling, Baseboard & Trim Without Bleed Throughs

6 Materials
$50
4 Hours
Easy
Painting raw wood white can be scary. You want to be sure there would be NO BLEED THROUGH or else your project could be ruined and a complete waste of time. Let me show you how I painted my knotty pine fireplace wall and wood trims.
I knew I wanted to paint the wood paneling and trim white and really lighten and brighten the wall -- also making the unique fireplace shape and brick texture stand out. But if I did it wrong all that knotty pine could end up only partially white with little yellow spots all over.
I used my favorite primer. I've used it in every room we've painted so far - a little goes a loooonnnngg way! This primer is shellac-based, which means it's the very best at preventing stains from seeping through the paint.  This primer also goes on without sanding - it sticks to everything!  And it dries super quick, so you can just keep working.  I also used it to prime my kitchen cabinets, and was really happy with the results.  
It also stinky!  So take precautions and use a respirator if you feel it's necessary.  (I hate wearing a mask, but sometimes it's just a good idea!)
I used a mini roller which made this job go super quick.  You will need a standard paint tray though, as this roller didn't quite fit in my Pelican paint bucket.  All I did was roll it on with the roller, then go back with a chip brush and fill in all the cracks.  Since this is oil-based primer, I just chose to use a cheap chip brush.  That way I can throw away the brush without feeling bad about it.  

Go to my full blog for a complete supply list - I'll give you links to the best products and paints from my years of experience.
When painting trim, a long paint shield will be your best friend.  I used it against the brick .....
.... and against the floor trim.  I've done the trim in my house the same way - 2 coats of primer, then paint.  To paint trim up against carpet, I used painters tape to tape off the carpet.  
Once the primer was all dry, I used an off-white semi-gloss paint.  I applied it with the roller in the exact same way.  So now, no knotty pine walls - they are crisp and clean and white! 

Keep following along with my blog as we redesign and update each room in our new house! You can subscribe here. I also share furniture makeovers and live painting tips on my facebook page: @rootsandwingsfurniture.

You can also click on the blog link below to see more angles of the living room, the wall colors I used and how I painted the fireplace surround for a big change!

Thanks for stopping by

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Jenni Ingram
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

  1 question
  • Faye Faye on Oct 08, 2018

    What type paint did you use over the ZIM? Latex or oil based? Looks great. Thanks!

Comments

Join the conversation

 2 comments
Next