I bought some really cool posters from
Two Hands Paperie with the assumption that I had frames to put them in. Wah wah wah! I had frames, not the right size frames and I wasn’t going to buy any so I did the next best thing and made my own. With materials I already had. These are my favorite types of DIYs because they challenge me to think more and use up materials that otherwise would just sit.
Here is what you will need:
~ 4 pieces of Scrap wood or new wood that measures 1/4” x 1/2” x 22” (or 2“ wider than width of your poster. Mine were 20”).
~ (4 qty) Size 10 machine screws
~ (4 qty) Size 10 wing nut
~ String, twine, yarn, rope to hang your poster. Mine measured 53”.
~ Drill and 1/4” drill bit
~ Minwax furniture finishing wax in clear
~ 120 grit or finer sandpaper