How can I get rid of steam mop burn mark on laminate flooring?

When a steam mop is left in one position too long or hard water is used in the water tank, white spots will be left on your floor. Remove them by:

Step 1

Moisten one end of a towel with undiluted white vinegar.

Step 2

Wipe away the white spot with the towel.

Step 3

Moisten the opposite end of the towel with water and wipe the vinegar from the floor. The vinegar smell will go away once it is dry.

Step 4

Use distilled water in your steam mop tank to prevent future white spots on your floor.

Try rubbing the spot with some white vinegar.

White vinegar to the rescue. apply it to the area where it is lightened.

Clean with Acetone or denatured alcohol

Hi David, I would advise against using a steam mop on a laminate floor. Over time the steam will warp the edges and cause gaps between the planks. These gaps allow moisture to creep under the plank and cause even more damage.

here are some ideas

https://www.thriftyfun.com/Steam-Cleaner-Left-White-Mark-on-Laminate-Flooring.html

https://www.hometalk.com/diy/floors-ceilings/q-heat-mark-on-laminate-floor-22065179

I agree 100% with white cleaning vinegar advice already given.

You may have to do the same all over to get the same over all look.

White vinegar!

I would call the manufacturer ask them

May be try Barkeepers friend and a little water.

Hi David, hope this helps you out.

https://www.hunker.com/13414740/how-to-remove-burn-marks-from-laminate-flooring