Just had hardwood put down on my floors. What can I use for shine?
+8
Related Discussions
Suggested Project Book
I use rejuvenate. .it is easy to apply..no worries about streaking..lowes or hd...i get high gloss
vinigar is all around good for wash and shine
You can rent a floor buffer at a hardware store
If they are true hardwood and have no finish on them, try bowling alley wax and use a floor buffer.
Dust mop frequently and use a microfiber mop one that is flat. Use cool water.
Be very careful not to use mop & shine type products. Did this with my hardwood floors. Looked great for a short time and then it left a dull finish that I could not remove. Suggest asking the manufacturer or installer.
I used Johnson's paste floor wax on my oak floors years ago. If they are not sealed you can seal them with a clear floor sealer or sealer plus stain such as Varathane or Minwax.
Have maple hard wood. When I refinish, I get it done professionally with an oil-based semi-goss varathane or urethane type finish. Easy to maintain. Damp mop. If the finish gets duller over time, just add a very small amount of vinegar to the wash water. Dark floor are "in", but natural are timeless.
Use rejuvenate.