Repair and Refresh Tile Grout the Easy Way

4 Materials
$10
2 Hours
Easy

Moving right along on all the repairs needed on the Texas Blue Bungalow. The guest bathroom needed floor repairs when we bought the house. They are finally completed 10 months later!


I painted this bathroom right away because, well it was, um yeah! Click HERE to see what color is used to be!


NOTE: I'm not a pro, I'm just winging it!

Like I said, this floor needed repairs when we bought the house. There was large spaces that there was no grout at all and then lots of places that had very little grout and several places with crumbled and loose grout. If you look closely you can see the missing grout in that area in front of the cabinet, between all the rugs.

More missing over by the door too. It was crumbling and or missing throughout the entire walkway area. It's an old house and the wooden floor underneath it flexes is my guess at why the grout gave up and quit holding together, but don't quote me on that cuz IDK for sure!

Anywhoobs, here are a few shots of the worst damage where there was grout completely missing or just crumbled in the cracks.

You could hear the floor crunching when you walked on it before. NOT ANY MORE!

This is the caulk/grout used to do the repair and re-finish of the entire bathroom floor. It's siliconized sanded grout in a tube that came from Home Depot. To be honest, I never even knew this stuff existed until now! Best stuff ever!


Step 1: Use a shop vac and vacuum the entire room, making sure to get all loose pieces out. You can use a flat head screwdriver to test if the grout wants to come loose too.

Step 2: Clean the entire floor well. I used a steam mop.

Step 3: Starting at the far end of the bathroom and working toward the door is the best idea. To refresh, run a bead of caulk/grout on each grout line.

Step 4: Smooth each line with a damp fingertip.

Step 5: Clean up excess grout with warm soapy water. I used a mop bucket and old micro fiber towels.


NOTE: This is WAY too much grout and WAY too big of an area to work with. It is not necessary to use large amounts of grout (unless there is a crack) , just small amounts will do.

This is after clean up. It took me forever to clean up that much area. It starts drying pretty quickly so work a small area at a time.

TIP: Squeeze out small, thin lines of grout and stop short before you get the end of your line. When you smooth it out with your damp finger, you WILL have enough to keep going to the end of your line. Less grout means less waste.


Obviously, if you're trying to fill a gap, you will need to use more grout and keep pushing it in the crack until its full.


Let the caulk/grout cure 24 to 48 hours before you walk on it.

Wowee! What a big difference! It looks brand new now! Why didn't this happen sooner?

Just look at how nice its looking now! No more gaping cracks and crumbles!

I can't get over how easy this was to do! I will definitely be using this method again in the future!


Thanks for looking!

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
DeeDee
Want more details about this and other DIY projects? Check out my blog post!
Go

Questions on this post

Have a question about this project?

Your question...
3 of 8 questions
  • FreeCycle Cheryl FreeCycle Cheryl on May 20, 2021

    For more narrow grout lines, can this product be applied with a damp finger instead of the gun?

  • Dorothy Dorothy on May 22, 2021

    Can you use this in kitchen on tile where grout is missin?

  • Queenbee Queenbee on May 30, 2021

    So this will stick to the existing grout that is there? I want to refresh the grout that is there and has turned dirty and scrubbing it does not help.

Comments

Join the conversation

3 of 23 comments
Your comment...
Next