Propagating Succulents 3 Simple Ways

2 Materials
$30
5 Weeks
Easy

As your succulents grow, they’ll need pruning or dividing. You may as well propagate them and get new succulent plants. Propagating succulents is easy and I’ll show you 3 simple ways to do it.


How you propagate your succulent depends on what type it is. Two of these succulent propagation methods are faster, but all are straightforward. I’ll guide you through and you’ll have new succulents, for yourself or to give away, in no time.

WHEN TO PROPAGATE SUCCULENTS

The spring and summer months are the best time for propagating succulents. Early fall is fine if you’re in a climate with warmer winters. 

Materials Needed


Pruners, floral nippers, scissors, or a knife. What you use is up to you, just make sure it’s clean and sharp. Also, pots, saucers, or trays and soil mix.


I use my  Felco pruners (I’ve had them for 25+years and they’re still working like a charm!) for succulents with thicker stems and my  Fiskar Nips (also a tried and true old standby) for those with thinner stems.

What soil mix do I use for succulent propagation?


The best soil for succulent propagation for your stem or leaf cuttings or divided plant is a light, well-aerated mix. You want the roots to be able to easily form. A propagation mix or seed starting mix isn’t necessary but a succulent and cactus soil mix is great. Popular brands you can buy online are:  Bonsai JackSuperfly BonsaiCactus Cult, and  Hoffman’s


Here’s the DIY  succulent and cactus mix recipe I have used for over 2 years now for propagation as well as repotting and planting all my succulents (both indoors and outdoors) in pots. You can also use potting soil formulated for houseplants with  pumiceperlitecoco chips, etc added in to lighten it.

1) Propagating succulents from stems


This is the fastest method, in my book anyway, and the one I do most often because you can take bigger cuttings and instantly have bigger plants.


You want to make sure at least 2 of the nodes are in the mix for rooting to be successful. You may have to press down on the mix a bit to get the cutting to stay standing up. I’ve had to stake some cuttings. I’ve used floral pins to get some trailing stems to stay put like my  String Of Pearls.


Pictured above are two Panda Plant cuttings. The one on the left will be ready for propagation once the stem heals over. You want to take off the lower leaves (how many depends on the size of the cutting) before putting it in the mix.

2) Propagating succulents from leaves


This is the method I do least often because it takes the longest and I’m an impatient Aries girl. It’s a very popular method of propagation and easy to do so I want to share it.


When you take a leaf cutting, make a clean cut all the way back to the stem. Don’t cut it off half way up the leaf, the leaf won't take root if you only take off a portion of it.

After your leaves have healed, lightly press them into a tray or saucer filled with the mix. I’ve also just laid them on top of the mix and rooting has been successful.


In case your new to the world of succulent propagation, just know that the leaf doesn’t grow a new stem. A baby plant will appear at the base of the leaf.


All succulents with leaves growing on stems have propagated this way for me. In the case of my Panda Plant, there are also baby succulents growing on the stems.

3) Propagating succulents from pups/division


This is the method used for clumping succulents (those that spread by producing pups or offsets or babies) like,  Aloe Vera, Hens and Chicks, Haworthias, and Gasteria.


I take the plant out of the pot and carefully pull the pups off the mother plant. Or, if they’re being stubborn, I use a knife to separate them.


You can so divide any succulent with multiple stems in one pot like Christmas Cactus, String of Bananas, Burro’s Tail, String of Buttons, etc. How many plants you divide yours into depends on how big it is.


Put the pups or divided plant into pots with succulent mix and they’re good to go.

Healing the succulent stem and leaf over

The leaves and stems of succulents are full of water. It’s best to let them heal or callus over (exposing to air, just like we do with a wound) before planting.


How long let your cuttings heal over depends on the succulent and your environment. In Santa Barbara (coastal Central California) I could let them heal over longer than here in the hot, dry desert.


For example, with String Of Pearls, it’s 1 day here and 2-5 days is fine in Santa Barbara. Echeverias can heal off up to 3 weeks here, whereas in Santa Barbara I healed them off up to 6 months.


As for succulent leaves, I let them callus for 1-3 days.


2 things to note:

Keep your stem (and leaf) cuttings out of the direct, hot sun. They don’t like it really hot or cold while healing off either.


Where do I put my succulents while propagating?


In bright, indirect light. You don’t want to put them in a dark room, nor in direct sun.



How do I water my propagating succulents?


I water cuttings and divided plants a bit more often than I would the established mother plant, usually every 4-7 days depending on the temps. Be careful not to drown your succulents out, too much isn’t good either. I’ll back off on the watering frequency when I feel like the roots are getting established, after 2-6 months.


I previously used a  spray bottle to keep the top of the soil lightly moist for leaf cuttings, small stem cuttings, and small divided plants. I now find  this squeeze bottle with a long neck works better for me. The output of water is gentle and I can easily control the amount. I use room temperature water by the way.



How long does succulent propagation take?


It usually takes about 3 weeks for the roots to appear and up to 6 months for significant rooting. It’ll vary depending on the succulent, time of year, and environmental conditions. I sometimes give my propagating succulent stems a bit of a very gentle pull after 4-8 weeks to see if there’s any resistance but usually, I just leave them be.

Resources for this project:

Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Joy Us garden
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

  1 question
  • Kelly Kelly on Jun 30, 2021

    My succulent s keep dying and I have no clue why. I keep them out of direct sun and water them maybe once a week or two. But every single one of them die and I buy more and try again. Idk what I'm doing wrong

Comments

Join the conversation

 4 comments
  • Liz25222228 Liz25222228 on Jul 03, 2021

    a lot of my darling succulents got rained over during a hurricane last night. Mainly my sweet hens and chicks. I took them out of the first and left them to dry. I lost one. I will try to propergate some others.

    im an Aries also and I am enjoying all this information that I didn’t know. Sometimes I just enjoy learning how to do it.👍️

    • Joy Us garden Joy Us garden on Jul 04, 2021

      Hi - Nice succulents! I've been gardening since I was 5 (a very looong time ago!!) & even though I studied horticulture & landscape design in college, experience has been my best teacher. Gardening is all about trial & error & learning as we go. Happy summer! Nell

  • Liz25222228 Liz25222228 on Jul 03, 2021

    thanks

Next