The Absolute Best Faux Brick For A Backsplash

It’s hard to believe there’s a low-cost backsplash option that not only looks like real brick but is durable, waterproof, can be cut with scissors, and can go over your current tile backsplash. By using 3d faux brick PVC panels for walls, you can get the look of a high-end backsplash but without the cost and hassle!

Not only is this backsplash option surprisingly durable, I was even able to do a mosaic feature over my stove with the same PVC bricks. This DIY faux brick backsplash gave my entire kitchen a whole new look without learning how to install tile or renting a tile cutter!

In this step-by-step tutorial and video, I’ll show you the best ways to get the look of the real thing by using PVC wall panels you order on Amazon!

LET ME SHOW YOU:

• Why using PVC panels for walls is the best DIY faux brick backsplash option
• How to make your faux brick paneling look like real brick – whether you want red brick, whitewashed brick, or white painted brick like my own.
• How to do a mosaic over your stove with brick plastic wall panels
• Why the biggest disappointments can be the greatest blessings in this week’s Renovate Your Faith devotional at the bottom of this post.

WANT TO SAVE THIS PIN ON THE BEST FAUX BRICK FOR BACKSPLASHES? CLICK HERE TO SAVE IT TO YOUR FAVORITE PINTEREST BOARD:

(As an Amazon affiliate I earn from qualifying purchases. I only use affiliate links on products I use and love. Please see my full disclosure HERE).

The Absolute Best FAUX Brick For Backsplashes

☑️ If you are in a hurry or just curious, here is a quick link to the brick PVC wall panels I got on Amazon. PVC brick panels are not created equally! After trying out several, these were by far the most durable and realistic: Brick PVC Panels for Walls and Backsplashes

Quick Links to Information in this Post

After I painted my cabinets, I was so impressed with the results but what I wasn’t so crazy about was the dated tile backsplash.

I wanted to replace it but didn’t want to demo the old tile and make a mess out of my freshly painted cabinets. Also, I needed a low-cost option that was easy! I was so happy that I found this option for creating the look of real brick.

The PVC panels I used completely exceeded my expectations! They not only looked exactly like painted brick or expensive white tile but they gave me the option to do a mosaic over my stove! I am still amazed at how well the backsplash turned out. Even though I spend hours and hours painting my kitchen cabinets, the backsplash ended up stealing the show for my whole kitchen makeover!

Brick Backsplash Pros & Cons: What Are My Options?

What kind of brick is used for a backsplash? There are several ways to get the look of a brick backsplash but not all of them are low maintenance with easy installation at a reasonable price.

Can You Use Brick As a Backsplash?

Brick backsplashes offer your home a depth of warmth and character while working with several different design styles including traditional, farmhouse, coastal, and even contemporary.

Using real brick is the most durable option but it is the priciest option. Also, solid brick backsplashes take up precious counter space or you need to find a solution for a backsplash material that is so much deeper than tile.

If you don’t want the solid brick backsplash to stick out, you may have to have extensive drywall work done to reduce the new backsplash’s depth. If you don’t want to see an overhang, it might mean changing out the countertop configuration. You’ll also have to have an engineer inspect your kitchen to make sure that the studs can support the weight of so many bricks.

All building materials have their pros and cons. So while real bricks are beautiful, they are not very user-friendly!

What About a Brick Veneer Backsplash?

Brick veneer tiles are basically thin brick tiles that mimic the look of brick without the size and weight issues. As with regular brick, veneer brick can be very absorbent and that means it can easily stain and absorb moisture.

Also, thin brick veneer usually has to be installed by a professional. If not, be prepared for a learning curve and to rent a tile cutter. In addition, the cost of brick veneer can get pretty pricey!

What about Faux Brick Backsplash Hardboard Panels?

When I first started this process, I was going to use the hardboard panels you might have seen used for other DIY faux brick backsplashes. But I went to Home Depot and they only had 1 in stock and it was damaged. They didn’t know when the next shipment would come in but after taking a closer look, they are incredibly heavy because they are essentially high-density fiberboard (HDF).

While HDF brick panels are cheap and durable, they will require a jigsaw or circular saw to cut. They also only come in 4′ x 8′ pieces and they won’t cut them smaller to put in your car.

My main issue with these is that you have to have some solution to cover up the edge because they are so thick in comparison to the my very thin brick backsplash kitchen panels. Hardwood panels will stick out at least 3/4 inch on top of your old tile and you have to cover up the left and right edges so it’s not obvious it’s not a solid panel and now individual bricks.

I was so disappointed in this option after checking at Home Depot because I thought this backsplash project would not work out. Fortunately, I’m so glad they didn’t have more in stock because the PVC panels I used are such a better alternative!

How Can I Make My Own Kitchen Backsplash?

PVC panels are a new design trend that give any wall a modern look on a budget. I love the PVC brick panels I used because they are water-resistant, chemical resistant, non-staining, and corrosion-resistant(unlike metal panels). They are also low maintenance, and you can get them on Amazon so they are delivered to your door. They are such a cost-effective alternative to real brick, brick veneer, or brick hardboard because they don’t require any special equipment.

Even if you have a stubborn problematic wall, PVC faux brick panels are not perfectly smooth because real brick is not perfectly smooth. Therefore, any imperfections in the wall are just hidden by the normal texture of the brick.

One thing I LOVE about this DIY faux brick backsplash was that it gave me a lot of flexibility. The brand I used came as interlocking decorative wall panels so that you wouldn’t be able to detect one straight line between where each panel linked up.

Also, if I didn’t cut the PVC perfectly straight between the “bricks” I knew that the caulk would cover it up so I didn’t feel like I had to get each cut perfect.

Can PVC panels be painted?

The plastic panels I use can absolutely be painted. The fact that can be painted gives you lots of options whether you want to paint them a solid color, whitewash the panels or change the grout color.

Which PVC Panel Is Best?

There are several 3d faux brick wall panels on the market and some of them are much more realistic and durable than others. After ordering several different faux brick panels on Amazon, I was happy to find that the most durable was also the one that gave me the most authentic look. Here is a link to the PVC wall panels I used: The Best Faux Brick For A Backsplash

How Much Does A PVC Panel Post?

The cost of the waterproof PVC wall panels I used is $3.08 a square foot. Real brick is about $12 a square foot on average and your typical white veneer brick at Home Depot is in the range of $5 to $15 a square foot.

Can You Put PVC Over Tile?

I can’t speak for all PVC panels but the ones I used were so easy to install over my old natural stone tiles using Liquid Nails. You can also put the panels over ceramic tile and glass tile but you would need the liquid nails for glass.

DIY Faux Brick Backsplash Color Options

My original plan was to have a whitewashed backsplash instead of the antique white brick backsplash. I was so happy with how my whitewashed fireplace turned out (see the reveal here) and I was hoping to have the same look on my backsplash.

However, the only reason I didn’t go with the DIY whitewashed brick backsplash, was because it didn’t match my countertop. Also, I don’t love my countertops and because they are pretty busy I needed a simpler backsplash. If you want the loo of a DIY whitewashed faux brick backsplash, I’ll show you how to get this look in the painting step.

The PVC panels come in different colors but also you can change the color options with paint as I did.

If you love the look of classic red bricks, you can leave the red brick backsplash panels as they are. I’ll also show you how I got the brick of the painted white brick backsplash. These panels are great because you have several color options to match your style and kitchen colors.

Supplies Needed Installing PVC Panels for Walls

PVC Brick Paneling Pieces – I tried several and these looked the most realistic and are the most durable: Best Brick For a Backsplash You can request a free sample to get a closer look.

Scissors – These are my favorite scissors and I own three pairs. They work well for making precision cuts: Fiskar Scissors

Tape Measure

Pencil

Zinnser Cover Stain Primer – It’s a good idea to prime first to make sure the paint adheres. You can find it in a quart at Lowe’s or Home Depot usually.

Benjamin Moore Advance Paint – You’ll want a quart of this paint because it’s really durable and covers well. The color I used was to match my cabinets I painted in Sherwin Williams Alabaster and a satin sheen. It was my top paint in this post: Best Paint For Cabinets (24 Brands Blind Tested & Reviewed) For color ideas: The Best White Paint Colors for Cabinets

Liquid Nails – The maker of the PVC brick panels recommends the Liquid Nails for Heavy Duty Projects ( Model# LN-901) so be sure to get that formula. I used about 7 tubes of this! You can find it cheapest at either of these stores: Liquid Nails at Wal-Mart | Liquid Nails at Lowe’s

Paintable Caulk – I used two tubes of caulk. The good thing about caulk is that it looks like grout but is not as messy and easier to apply. I used this brand: Dap Paintable Caulk

Zibra Brush – This is my favorite brush for cabinets and furniture projects. You will use this to get a smooth finish without brush strokes with your paint: Zibra Soft Bristle Paint Brush

Cheaper Brush for Cover Stain – Use this cheaper brush for the oil-based stain that you can just throw out when you are done instead of having to clean it with Mineral Spirits: Best Brush for Primer

Spirit Level – You can also use a smaller level if you have one and a straight edge like a yardstick.

Damp Rag – When you are gluing and caulking it’s not a bad idea to have a gallon of warm water with a few drops of dawn soap in case things get messy gluing. Just dip your paper towel or rag in the water when you need to wipe up glue or caulk.

Painter’s Tape – This kind is my favorite when it comes to getting a really clean line – Frog Tape Delicate Surfaces Painter’s Tape

How to Install A Faux Brick Backsplash With PVC Wall Panels

Here is the step-by-step tutorial but you can also see the video tutorial that better shows the process. If the video tutorial doesn’t pop up, you can find it here also: The Best Brick for Backsplash, YouTube Video

STEP 1: Paint Your Panels Before Installing Them

Stop! Don’t forget to take a pic. When you are done, post the pic on Instagram and tag me @renovatedfaith! ❤️

I like doing most of the painting before you install them because paint covers better when the surface is flat and you also don’t have to worry about drips this way.

You have three color options with these PVC brick panels:

Painted White Brick Backsplash Panels

For white panels like mine, add a coat of Cover Stain to the surface of the brick before you even cut them. Brush on the cover stain with your cheap brush (click here) so you can just throw it away and not have to use mineral spirits to clean it. Brush on the cover stain as shown in the video to save time and let it dry for about 4 hours.

Use your Zibra Brush (click here) to brush on the first coat of paint – Benjamin Moore Advance. It will give you a durable finish and with the combination of the Liquid Nails behind the panels, the surface will be surprisingly hard.

Paint a coat or two of paint on the panels and let them dryfor 16 hours between coats. We will add one more coat after they are installed and after we caulk. For now, if you aren’t getting full coverage, that’s ok. I had these spread out around my house to dry fully.

Whitewashed Brick Backsplash Panels

As I mentioned, I really wanted a whitewashed brick backsplash but it didn’t coordinate well with my backsplash. However, this option is very doable. Go to this tutorial and use the exact same process as on the bricks on my fireplace: How To Whitewash a Brick Fireplace

I like to have a picture in front of me when doing this whitewash technique as a guide to help me get the exact same whitewashed look on my own backsplash. Here are some great ideas: Whitewashed Brick Backsplash Kitchen Ideas

Rustic Red Brick Backsplash

If you want to leave the bricks red, just put them up as is. We will caulk and then paint over the caulk lines with the same color paint as the grout lines. If you like the look of white grout, you could also paint the ground lines white.

The best and most durable paint for this is Benjamin Moore Advance. After blind testing over 24 different cabinet paints, it was by far the best paint for cabinets and works well for backsplashes too: Best Paint for Cabinets (24 Brands Blind-Tested and Reviewed)

God never leaves a project half-done…He continually works on each one of us, as a lavish expression of His amazing love and grace. So many of my DIY projects remind me of how God renovates our hearts. If you are a work-in-progress, just like I am, check out the Renovate Your Faith Devotional at the bottom of this post. Click here to get a weekly reminder of new posts by email.

STEP 2: Make A Level Line

Remove all outlet and switch covers.

If you are doing white brick panels like mine, your panels will now have one coat of primer and one or two coats of paint.

Now that your PVC panels are dry, decide what orientation you want the PVC pieces to be. In other words, decide which way you want to be up. They can go either way but it’s good to be consistent.

I like to work from the left to right. Put up a wall panel on the wall so the bottom edge is flush with the countertop, leaving a little space for the caulk line.

Mark a few dashed lines with your pencil along the top edge of the PVC brick panel as I do in the video. Take the brick panel down and see if the line is level. Once you find level, trace a level line a the same height as the dashes along the rest of the wall. This level line will be a guide for all our pieces.

Step 3: Dry Fit The Faux Brick Panels

Use painter’s tape to dry-fit the panels to the wall. By doing this, we are getting of sense of how they will line up on the wall and will mark where to cut holes for switch plates.

Put up as many full panels as you can with the painter’s tape. Make sure they are lined up with the level line you already made.

Feel where the switches and outlets are behind the panels and mark those locations with a pencil. Take down the panels and cut out those areas. This is going to take a little trial and error. Mark the area, cut out a hole, put it back up again, and cut a little more.

Do this until you have a hole big enough to expose the screw holes for the switch plates and outlet covers.

Any gaps on the wall that were created from cutting holes for the switches and outlets will be filled with smaller pieces later.

STEP 4: How do you attach PVC sheets?

The best way to attach PVC sheets is with Heavy Duty Liquid Nails. I like to apply it to mostly the indented grout areas between the bricks but you can also add it in the centers of the bricks.

You will use a lot of liquid nails for this and that’s ok! If any squeezes out on the edges, just use a damp rag to wipe it.

Apply glue to the back of the first piece and push it onto the wall in place, making sure it lines up with your pencil line.

Keep gluing the PVC panels sections from left to right starting in a wall corner, as shown in the video.

When I finished gluing on all the full panel pieces, I put bags of Epsom salts (you can use anything) up against the panels to keep them in place while they dry fully.

Once the full panels are dry, you will go back and fill in the holes. Just cut down the middle of the grout lines to make smaller brick panel pieces. Add glue on the back and glue them into place. If the cut edges don’t line up perfectly, no worries! We will cover those edges with caulk.

Continue cutting the final pieces to fill in all the leftover sections without brick. Let the Liquid Nails dry overnight.

How to Make A Stove Backsplash Mosaic with Faux Brick Wall Panels

My existing natural stone had a mosaic backsplash over the stove and the edge tiles stuck out a little. So, what seemed to be a problem at first was actually a really great opportunity to do my own little brick mosaic on the inside in a herringbone pattern. It turned out so much better than I imagined and makes a great focal point for my kitchen!

To make the herringbone tile mosaic, I got a piece of cardboard and cut it to the exact measurements as the inside of the square of the tile border.

I cut out several individual bricks from my leftover panel pieces and placed them on the cardboard that was flat on a table. I laid them out exactly how I wanted them and put rows of painter’s tape all along the top of the mosaic bricks. Then I cut the edges of the bricks that overhung over the cardboard with the scissors.

Now I had a perfectly sized brick mosaic held together with painter’s tape on the top. I removed the cardboard and put Liquid Nails on the back of the mosaic tiles.

Then, I pushed it in place over my old tile mosaic. After a few hours of the Liquid Nails drying, I carefully pulled off the tape with one hand and the other hand holding the bricks in case the glue was still tacky. I let the liquid nails completely dry overnight.

On the next step, I caulked between all the edges of the tiles in the mosaic.

STEP 5: CAULK Between The Faux Brick Panels

I love that you can use caulk instead of grout for this step. It’s a lot less meticulous and you don’t have a messy grout bag to deal with.

You are going to caulk just the edges of the panels and panel pieces where a cut edge is exposed. This also includes the top edge and bottom edge.

To caulk, apply a thin bead to a section of the cut edge as shown in the video tutorial. Moisten your index finger with a damp paper towel and lightly smooth out the caulk line. Then wipe any extra caulk onto the moist paper towel or a baby wipe. The line won’t be perfect and that’s ok!

I show this better in the video and it’s probably easiest to do without long nails. Regardless, it takes a really like touch and a little practice. Fortunately, you are trying to make it look like grout which is very imperfect.

Be sure to also caulk the corners of walls where the backsplash meets your cabinets. Let all the caulk dry overnight.

For the bottom edge that meets the countertop, I put down a long line of painter’s tape. I pulled it up a few minutes after putting down the caulk. Pulling up the tape before the caulk has dried allows you to wipe up any mistakes..

Step 6: Apply The Last Coat of Paint To The PVC Panels

Now you’ll want to add one last coat of paint over your PVC panels. You always want to add a coat of paint over caulk because if you don’t, it will attract dirt. Add the last coat of paint with your Zibra brush to get a brush-stroke-free finish. Let it dry for 16 hours.

You can also go back and touch up the top of the bricks later if you have any bricks that don’t have full coverage.

My kitchen has a whole new look. I think that my old tile would have severely dated my newly painted cabinets. I’m so glad that I opted to update the backsplash too!

RENOVATE YOUR FAITH: Blessings Disguised As Disappointments

To escape the hot Texas sun, my daughter and I spend a lot of time at the pool each summer. She’s an avid swimmer now, but she was so scared of the water when she was little.

One day many years ago, I saw a huge water bug in the pool that was at least 2 inches long. I didn’t think much of it until a few minutes later when I noticed it perched on Morgan’s arm floaty. I quickly brushed it off without her noticing. We swam a few minutes more before I realized how unsuccessful I was at getting rid of the bug as it was now in Morgan’s hair!

From behind her, I quietly and stealthily grabbed the nasty bug when she flinched and yelled, “Ouch, why did you pull my hair, Mama?!?” Fortunately, she never caught on to what I was really doing.

I know Morgan pretty well, and had she realized a huge bug was caught in her hair, she would have never stepped foot in the pool again. As Morgan saw it, I inconvenienced her by pulling her hair but in reality, I saved her from something I knew would upset her and derail her progress in swimming.

The same situation has happened countless times in my relationship with God. What I have often seen as a major inconvenience, was merely the ripple effect of God’s protection from a hurt or tragedy that He alone could save me from.

When I went to check out the hardwood brick panels at the home improvement store, I was annoyed by the fact that they wouldn’t work out after all. Little did I know there was a much better solution ahead. I think God does this all the time on a very small scale like my disappointment with the brick panels but also with major life events.

Looking back, there are many instances where I thought I knew what was best for me. Hindsight is truly 20/20 and I’m thankful God didn’t answer ALL my prayers. He knows that sometimes what we desire most is the very thing that will destroy us. Thankfully God is faithful to intervene in the lives of His children to show them a better way…His way.

Sometimes life’s disappointments are God’s protection so we can later experience His Best.

Because of His great love for us, there are times God has to drag us kicking and screaming to protect us from less than His best. And what is best for Him is always best for us. Proverbs 16:9 says, “The heart of man plans his way but the Lord establishes his steps.”

Maybe God has you on what seems to be a perilous path, maybe you feel like there is no end to this phase of life or you are enduring a trial that seems pointless. Know that God works all things for our good and that there is a purpose for life’s hardships (Romans 8:28-29).

When you have a relationship with Him, what we perceive as an inconvenience is often his active role in protecting us and growing us to be more like Him. When we commit to follow Him, God faithfully protects us from less than His best.

What are the ways God has protected you and how is He protecting you even now from greater hardships?

For more spiritual encouragement, click here for the rest of my project posts that also include Renovate Your Faith devotionals.

Other Uses for PVC Panels for Walls

PVC Wall Panels aren’t just a new trend. They are great for different applications other than just backsplashes like accent walls, bathroom walls, and ceiling interfaces and you can even use them on a bed headboard. You’ll also find PVC panels, 4×8, used in industrial buildings and carwashes. Many of these are made with indestructive agrilite and come with EZ liners.

Here are some other ideas other than using them on a traditional wall space:

PVC Panels for Bathroom Walls

PVC Wall Panels for Outdoor Use

PVC Wa ll Panels for Basements

PVC Wall Panels for Garages

PVC Ceiling Panels and Ceiling Liner Panels

Wet Room PVC Panels for Walls

4 x 8 Plastic Panels for Walls

FAQ’s: How To Update Kitchen Tiles Without REmoving Them

What Are The Best Shades of White For a White Brick Backsplash In A Kitchen?

If you want a slightly off-white backsplash that is just a tad warm, I highly suggest Sherwin Williams Alabaster. It’s the closest you can get to a warm white without being too creamy. If you want a true creamy antique white brick backsplash, go with Sherwin Williams Chantilly Lace.

For a pure white backsplash that isn’t too bright, go with Sherwin Williams Pure White. Go to your nearest Benjamin Moore store and get Benjamin Moore Advance color-matched in these colors. They have all of these codes in their computer!

Can You Use ThESE Panels for a DIY faux brick Wall?

You can absolutely use this for a faux brick wall and it would probably not take as much time since there will be more of the full panels used and fewer individual bricks to cut. Just follow the tutorial above except I would use some sort of thick wallpaper paste instead of Liquid Nails in case you want to take it down later.

Should I clean my old tile backsplash before installing the PVC panels?

If you have a lot of grease buildup on your old backsplash you can degrease it with Krud Kutter or water mixed with a tablespoon of boric acid. Use a Scotch Brite scrubber to scrub the tile and rinse it off with a damp rag.

Are backsplashes outdated?

As long as we have kitchens, we will have backsplashes. Functionally, you need something to protect the drywall above your countertops. Wall panels will become more popular because they are less difficult to install, cheaper and more wipeable.

Skinny backsplashes are out of style though. Make sure to install a backsplash that goes from your countertops to your cabinets.

How do you attach PVC wall panels?

The best way to add PVC panels for walls is with liquid nails. Not only does it provide a really strong bond but it dries fast – but not too fast that you can’t make minor adjustments right after you put up your panels. It’s also low-cost and can be used on a variety of surfaces.

What about white brick backsplash peel and stick options?

After looking at some of the white brick backsplashes at Home Depot, I came across some peel and stick options. I have never been a fan of peel and stick because if you don’t put the panel in the right place the first time, you will have trouble unpeeling it and then, you can mess up the finish. I like Liquid nails because it dries fast but not instantly so you have extra time to adjust the position of the panels.

How do you make a brick backsplash look whitewashed?

Use the exact instructions in this post to get a gorgeous whitewashed brick backsplash with paint: How to Whitewash a Brick Fireplace With Latex Paint

Is brick backsplash hard to keep clean?

Real brick backsplashes are notorious for staining because brick is so porous. For this reason, coffee or tomato sauce can easily stain brick.

Does a brick backsplash need to be sealed?

To prevent real brick from staining, you can add a sealant to make the surface more wipeable and easy to maintain. Fortunately, the PVC panels for walls are waterproof and don’t need sealing.

How do you mortar brick backsplash?

We are using caulk where our PVC panels meet to replace the look of grout. Fortunately, caulk is much easier to work with and less messy. You can read more about mortar washing real brick h ere: How to Mortar A Brick Backsplash

How long does a PVC panel last?

PVC panels will generally last 15 years without warping or bending. They are very durable and are also water-resistant.

Is PVC Panel good for damp walls?

Waterproof PVC wall panels are great for damp areas because they are completely waterproof. Be sure to use a bathroom caulk to be sure to seal all the edges. I wish I would have known about them when I used a closet to propagate plants.

What is the cheapest way to cover a wall?

The only thing cheaper than using PVC panels for walls is beadboard wallpaper. I used it on our old house and wrote a post on how to hang it here: How to Hang Beadboard Wallpaper. I love how it turned out but it’s not as durable as the PVC panels. If you want to see how they turned out, check out this post: How to Sell a House in 24 Hours

Can you get the look of a white brick backsplash with black grout with PVC panels?

To get this look, paint the panels as described above in the tutorial. Then, take a small brush to paint the grout black or dark gray. Have a damp rag ready to touch up any mistakes.

More Posts Related To My DIY Faux Brick Backsplash

How to Paint Kitchen Cabinets Like A Pro

The Best Wall Color For A Living Room: Agreeable Gray

How to Whitewash A Brick Fireplace

27 Tips for Selling Your House Fast

How to Get a Beautiful, Grain-Free Finish on Cabinets

The Easy Way to Install Kitchen Cabinet Hardware

P ainting Furniture with White Paint: The Best Tips for Your Next Project

Final Thoughts ON The Best Faux Brick for A Backsplash

The backsplash can make or break the look of any kitchen. After I went to all the trouble of painting my oak cabinets, I didn’t want to stop there. But I needed an easy solution to cover up the old dated tile without a messy demo. Fortunately, I’m so glad I found this option for a modern faux brick backsplash on a budget. What was once a drab and outdated backsplash now has a beautiful, bright finish that I can be proud of.

With ease of installation, and the ability to apply them over existing tiles, PVC wall panels are the best faux brick for backsplashes. They give you the same look and durability as painted brick or white tiles, but are water-proof, stain-proof, and a fraction of the price. PVC brick wall panels are a great way to upgrade the look of your kitchen on a budget. With this tutorial and video, you can install it yourself and be so impressed with the gorgeous results!

DON’T FORGET – If you are looking to update your kitchen, be sure to download my FREE cabinet painting roadmap in this post: The Ultimate Guide to Painting Kitchen Cabinets Like A Pro

Easiest DIY Faux Brick Backsplash, YouTube Video

WANT TO SAVE THIS POST ON HOW TO UPDATE KITCHEN TILES WITHOUT REMOVING THEM? CLICK BELOW TO SAVE THIS PIN TO YOUR FAVORITE PINTEREST BOARD

I love to hear your thoughts and questions! Scroll down to leave a comment and I WILL reply! ❤️

Blessings,

Be sure to follow the fun here!

Email Subscription | Instagram | Pinterest | Facebook | Twitter

BEST Brick For Backsplash – Faux Brick PVC Panels for Walls

Welcome to Renovated Faith, where I share about DIY projects, my faith and everything in between! When I’m not spending time with my family, you will find me redoing furniture in the garage or watering plants in my greenhouse. This blog is about transformation. Anyone can renovate a house but only God can transform our hearts!