(Yet Another) Budget Kitchen Renovation

$400
6 Weeks
Medium
This was my first attempt at a DIY budget kitchen renovation. It all started with replacing the kitchen faucet, then wanting to replace the cabinet hardware to match it. It grew into a full-blown renovation before I knew it.
It's not a big kitchen - 19 doors, 4 drawers. I went with a two-tone gray color design. Preparation was light sanding and a deglosser "Liquid Sandpaper", and one coat of primer KILZ on the bottom cabinets, Zinsser 1-2-3 on the uppers. No paint sprayer, all brushed by hand. Used "painter's pyramids" http://www.painterspyramid.com/ to elevate the cabinet doors.
It was a labor of love, took longer than expected working solo and allowing paint to dry overnight between coats; but, it turned out great. If I can do it, anyone can do it!
See more photos at http://dsmyre.blogspot.com
Upper cabinets Cabot wood stain "Seacoast Gray", Varathane Satin polyurethane.
Kitchen built in 1987, oak cabinets, antique brass hardware.
Started with the lower cabinets. Cabot wood stain "Foothill", Varathane Satin polyurethane.
Wallpaper backsplash: KE29951 from AmericanBlinds.com

Deb S
Want more details about this and other DIY projects? Check out my blog post!
Go

Frequently asked questions

Have a question about this project?

  2 questions
  • Jessica Serrano-Gregg Jessica Serrano-Gregg on Sep 18, 2016
    Beautiful job! I went to your blog to see how you applied the wallpaper ( great choice)as a backsplash to your substrate. I didn't see how you did it. I have a few questions as I love this idea very much. If you would kindly advise, I'd appreciate your time, please and thank you in advance. 1) Did you use good old fashioned wall paper?? Is there anything special about it? 2) what was the original substrate you applied the paper over? Mine is ugly laminate and is out of place in this olddddd (1880s old) house. It's like the white stuff used in mobile homes I think. 2) other than cleaning, did you and how did you prep your substrate? 3) what adhesive did you use to apply paper? 4) most importantly!!! What did you seal it with? Obviously as a backsplash it will get dirty, greasy and wet lol. I'm assuming some sort of polyurethane that can protect and be cleaned. I've seen people use mod podge but I am heavy handed with disinfectant cleansers and know that would not work for me. Any help you could give me would be greatly appreciated and Thanks again!
  • Sandra Cheek Sandra Cheek on Sep 14, 2017
    Is the wallpaper waterproof?

Comments

Join the conversation

2 of 39 comments
Next