Refinished Vintage Chair
I found this cute vintage chair that would go great with a vanity I just painted. I wanted to be able to match it exactly, so they could be a set! It can be tricky bringing different pieces together, but in the end they look like a matching set. Here's how I did that.
The bones of the chair were great but it needed love. I first took the seat off and gave it a good clean.
I then applied two coats of Annie Sloan’s old white chalk paint and two coats of clear wax for protection.
I removed the material off of the old seat and recovered it using some really soft left over material I already had and the existing padding. I used a staple gun to secure the material tightly to the seat pulling tight so it wouldn't be not bumpy. Then I just screwed the seat back in using the 4 existing screws.
Now they are a great set! A perfect match! If you'd like to see my vanity makeover, check out my latest post- http://www.hometalk.com/diy/bedroom/furniture...
Enjoyed the project?
Resources for this project:
See all materialsComments
Join the conversation
-
Sandpiper@access comments. ca on Jan 16, 2019
Nice job. Love the curves of the chair.
-
Christine | myprettyhipthings on Jan 16, 2019
Thank you 😊
-
-
-
-
Christine | myprettyhipthings on Jan 26, 2019
Thank you
-
-
Frequently asked questions
Have a question about this project?
Would you mind telling me the paint color on your wall behind the dresser? It’s gorgeous! Thank you! H 😊
How much material do you buy for 6 dining room chairs
What bit do i use to drill?