Updating a Tired Cabinet With a Beautiful Bird Feature

4 Materials
8 Hours

Don’t ignore old furniture because it’s brown and boring. This is how to update a tired vintage cabinet using a beautiful bird feature.

Reduce, reuse, recycle.

Not all old wooden furniture needs painting. But if that old furniture is no longer beautiful and most importantly if no one wants it, then giving it a new lease of life is important.

It’s about making our furniture relevant to now and something someone would want in their home.

I bought this cabinet from a charity shop for £10. It has dovetail joints and a few dings which show its history.

If you like the look of this project, check out my most beautiful project ever!

The prep

I started by washing the piece down with sugar soap and then doing a rough hand sand over everything. It’s good to wash it first before sanding as you take away the oil and grime rather than pushing them further into the wood with sanding.

As I wanted to paint the piece white, I primed it first to help block the dark wood and tannins from coming back through later on. I used my favourite primer, Zinsser BIN.

I primed the dovetail joints also to make them more of a feature. I like the contrast with the original dark wood so didn’t paint the sides or the insides of the drawers.

Paint, paint and more paint

After a coat of primer I started with my first coat of Fusion Mineral Paint’s, Picket Fence. I love Fusion and use it regularly but had heard that Picket Fence requires lots of coats for good coverage. But even so it was a boring process going over and over the cabinet with more coats.

I just about eked out the final piece by using one 500ml/17oz pot. I didn’t want to have to buy more unless I had to because I knew I wouldn’t want to do a whole piece in it again.

I bought some new Staalmeester rollers from my local paint shop as they are regularly raved about. They were absolutely beautiful to use. A little less so after washing but still very nice quality.

Chips – not the good kind

Probably due to the heat in the room I was painting it, the paint kept getting chipped. Filling and painting over the small chips wouldn’t give the smooth finish I was aiming for. So I decided to sand the whole side off and start again.

Something about the primer or paint reacted with my sander though and it clumped on the sandpaper and didn’t do a good job of removing it. So I used Autentico’s Bio-Strip which you brush on over the surface, let sit for 20 minutes and then scrub or scrape off.

Not 100% perfect but a lot better than filling in little chips in the paint. Fortunately this was the door I was putting my bird transfer on so it had something to cover it anyway.

Adding a transfer

This beautiful transfer is called Oiseau Blue from Hokus Pokus. I’ve used Hokus Pokus before on this chest of drawers and really like how easy they are to apply.

I used Frog tape which doesn’t peel off the paint to keep the transfer in place while I used the provided stick to rub the transfer onto the door. If you peel up the plastic you can see where it hasn’t applied enough and you can go over it again until it’s done.

Need a gift for the DIYer or upcycler in your life (even if that’s you?!). Here’s my  holiday gift guide with some more unusual recommendations.

The colour gets lighter when it has applied to the surface as you can see with the bird’s wing.

The challenges

Whilst there were some struggles with this piece, the biggest one was at the end. As I had painted all the sides of the doors for a crisp look, the doors were now slightly too big and caught on each other.

After sanding various parts of the doors and where they attach to the cabinet, they still didn’t fit perfectly. The last thing I want is to sell a piece and for the paint to chip off at a later date.

My solution was to completely sand the edges of the doors and turn it into a feature. This way there’s no risk to the finish and the doors close smoothly. This look may appeal to fewer people but that was the sacrifice for a piece I’m comfortable selling and knowing the quality of the finish.

This was my first time using this handy hardware hole drilling tool.

It allows you to measure the size of your drawer and work out the middle point and where your holes will go. Then you drill straight through with the guide for accurate holes.

I changed the original handles to cup pulls and the colour really complements the existing keyhole.

To finish off, I lightly distressed the edges of the drawers and carcass to bring back some of the dark wood as a contrast.

The finished piece

And here it is, the finished piece. Between the lighter colour, bird transfer and new handles, I think it’s a world apart from the original piece.

A close up of the key and transfer. Aren’t they pretty together?

The painted dovetail joints really pop against the dark wood.

Are you looking to make your upcycling and DIY life simpler? 

Take a look at the  5 tools under $20 to make your life easier!

Resources for this project:

See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info

Want more details about this and other DIY projects? Check out my blog post!

Frequently asked questions

Have a question about this project?


Join the conversation

2 of 4 comments
  • Camsron Camsron on Sep 27, 2021

    That mahogany was beautiful. Perfectly matched in very large pieces.

  • Wishy washy maybe Wishy washy maybe on Sep 28, 2021

    Well in 30+ years someone will get a wonderful surprise when they strip the paint off...

    Keep and eye out in the future 🙃