How do I attach my homemade tin tiles to my backsplash?
+9
I made homemade tin tiles for my backspash in kitchen. I am not sure how to attach to wall.
I'd use Liquid Nails. Sounds lovely, good luck.
If you want them to be removeable you could try double sided carpet tape, or use Liquid Nails if you want them to be permanent.
Locktite Power Grab or any good construction adhesive. You may want to tack them with a nail while the adhesive dries.
I'd try gluing them to poster board ( the thick foam board kind) cut to size and attach that with tape or adhesive. That way if your wall isn't perfectly smooth it'll hide it
WOW! They are lovely tiles. Amazing.
By the way these are very nice you should post how you did them. If you want to remove them later use a releaseable glue. There is a product called mussell bound it is like two sided tape but stronger. You can purchase it at Lowe’s effort less then the on line prices I have seen. Let us know how this turns out for you and thanks for asking your question.
Thank you!! I may try to post . I still have more to do!