If this is a simple replacement, measure the length, width and height of your current sink and choose one with the same measurements.
Measure width from side to side and length from front to back–where you measure will depend on the installation type.
Height and depth are two separate measurements. Height is the full measure taken on the exterior from top to bottom. Depth is the interior measure of the basin and the depth of water it will hold. Sinks with an overflow are measured from the deepest point to the overflow only.
Painting lower vanity gray and upper mirrored cabinet white, while changing counter top to laminate (design in picture). Replacing the tile looked wall board with bea...
See more
If this is a simple replacement, measure the length, width and height of your current sink and choose one with the same measurements.
Measure width from side to side and length from front to back–where you measure will depend on the installation type.
Height and depth are two separate measurements. Height is the full measure taken on the exterior from top to bottom. Depth is the interior measure of the basin and the depth of water it will hold. Sinks with an overflow are measured from the deepest point to the overflow only.
Thank you so much. That was very helpful!