Kitchen cabinets & drawers need pulls. How do I space them correctly?
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
Should I re-stain or paint my cabinets?
Edit:””” 3 years later😂 I decided to paint them white and I am so very pleased with the results!We bought a new house with these ugly cabinets. I really cann... See more
Help me with my kitchen - strange layout with 3 doors in it!
I am looking for BUDGET options for my kitchen. It is very strangely laid out. I have 3 doors (laundry, bedroom and outside) that do not help the layout. I am planing... See more
There is a template. You can get it at Home Depot.
Didn't know that. Is it something I can do myself? Or is it cheap to buy? less than $5.00?
You need a tape measure and a spped square is helpful. First measure the height of the drawer and divide by two. That will give you the center line. Next, measure the width of the drawer, divide by two. Measure the distance between the mounting points of the new hardware, divide by two. Add this number to the measurement you discovered when you found the center point of the drawer and you will have the mounting point for the rightside of the hardware. Subtract the same lenght from the center point and you have the mounting point for the leftside of the hardware.
Doors will depend on the hardware, the bigger the hardware the further from the edge you will need to mount it.
Drawer pulls in the middle of each drawer and knobs 3" up from bottom of door.
Thank you all for your help. I found a GREAT tutorial online on my problem. The cabinets are even the same as mine! Now I'm all set to add all the hardware without any trouble.